641244
13
Zoom out
Zoom in
Previous page
1/24
Next page
Time-setting options en
13
OTime-setting options
Time-setting options
Your hob has two timer functions:
Programming the cooking time
Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1. Select the hotplate and the required heat setting.
2. Touch the 0 symbol. x lights up on the display for
the hotplate.‹‹ lights up on the timer display.
3. Within the next 10 seconds, set the required cooking
time in the settings range.
After a few seconds, the time begins to elapse.
Note: The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or cancelling the time
Select the hotplate and then press the 0 symbol.
Change the cooking time using the programming zone
or set to ‹‹ in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up ‹‹ for 10 seconds in
the display.
When the 0 symbol is pressed, the indications turn off
and the beeping stops.
Notes
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Programming
1. Press the 0 symbol several times until the W
indicator lights up. ‹‹ lights up in the time program
function display.
2. Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the 0 symbol several times until the W indicator
lights up. Change the time with the programming zone,
or set to ‹‹.
Once the time has elapsed
A warning signal sounds. In the time program function
display ‹‹ is shown, and the W indicator lights up.
After 10 seconds the indicators turn off.
When the 0 symbol is pressed, the indicators turn off
and the beeping stops.
 
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH845FVB1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH845FVB1E in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH845FVB1E

Siemens EH845FVB1E User Manual - German - 24 pages

Siemens EH845FVB1E User Manual - Dutch - 48 pages

Siemens EH845FVB1E User Manual - French - 24 pages

Siemens EH845FVB1E User Manual - Italian - 48 pages

Siemens EH845FVB1E User Manual - Portuguese, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info