530571
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
A hotplate should switch off automatically
The hotplate switches off automatically after the time that is set
has elapsed.
Setting the cooking time
The hob must be switched on.
1. Select the hotplate and the required heat setting.
2. Touch the 0 symbol. x lights up in the display for the
hotplate.
‹‹ lights up in the timer display.
3. Within the next 10 seconds, set the required cooking time on
the settings range. The possible presets from left to right are
1, 2, 3, etc., to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Notes
The same cooking time can be set automatically for all
hotplates. The set time for each of the hotplates counts down
independently.
The Basic settings section contains information on
automatically programming the cooking time.
If the combi zone or move function is selected when the
hotplates are combined, the set time is the same for both
hotplates.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming zone, the cooking time is reduced by one minute.
If the previous setting from 6 to 10 is pressed in the
programming zone, the cooking time is increased by one
minute.
Changing or cancelling the time
Select the hotplate and then press the
0 symbol.
Change the cooking time using the programming zone or set
to
‹‹ in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up
‹‹ for 10 seconds in the display.
When the
0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
If cooking times have been programmed for various
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
1. Press the 0 symbol several times until the W indicator lights
up.
‹‹ lights up in the time program function display.
2. Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0 symbol several times until the W indicator lights
up. Change the time with the programming zone, or set to
‹‹.
Once the time has elapsed
A warning signal sounds. In the time program function
display
‹‹ is shown, and the W indicator lights up. After
10 seconds the indicators turn off.
When the
0 symbol is pressed, the indicators turn off and the
beeping stops.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
# symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
 
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH845FT17E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH845FT17E in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH845FT17E

Siemens EH845FT17E User Manual - German, Dutch - 64 pages

Siemens EH845FT17E User Manual - Danish - 60 pages

Siemens EH845FT17E User Manual - French, Italian - 64 pages

Siemens EH845FT17E User Manual - Portuguese - 36 pages

Siemens EH845FT17E User Manual - Swedish - 60 pages

Siemens EH845FT17E User Manual - Spanish - 36 pages

Siemens EH845FT17E User Manual - Norwegian, Finnish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info