529658
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turn off a hotplate automatically
Enter the cooking time for the desired hotplate. The hotplate
turns off automatically once the time has elapsed.
Programming
1.Select the desired power level.
2.Press the 0 symbol. Thex indicator of the hotplate lights
up. ‹‹ lights up in the time program function display. To
select another hotplate, press the
0 symbol several times
until the
xindicator for the desired hotplate lights up.
3.Select the required cooking time in the programming panel.
The possible previous setting is, from left to right 1,2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue past
the options in the programming panel until reaching the
desired time.
After a few seconds the cooking time begins to count down.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
‹‹
appears in the time program function display for 10 seconds.
The
x indicator lights up. Pressing the 0 symbol turns off the
indicators and stops the signal.
Changing or cancelling the time
Press the 0 symbol several times until the required x
indicator lights up. Change the cooking time in the
programming panel, or set to
‹‹.
Notes
If a cooking time has been programmed in several zones, it
can be set to display all time values. To do this, press the
0
symbol several times until the
x indicator for the required
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
0 symbol several times until the required x
indicator lights up. Change the cooking time in the
programming panel, or set to
‹‹.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
1.Press the 0 symbol several times until the W indicator lights
up.
‹‹ lights up in the time program function display.
2.Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹ is shown, and the W indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
0 symbol several times until the W indicator lights
up. Change the cooking time in the programming panel, or set
to
‹‹.
 
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EH645MB11M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EH645MB11M in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EH645MB11M

Siemens EH645MB11M Installation Guide - English, German - 13 pages

Siemens EH645MB11M User Manual - German - 56 pages

Siemens EH645MB11M Installation Guide - Dutch - 13 pages

Siemens EH645MB11M User Manual - Dutch - 56 pages

Siemens EH645MB11M Installation Guide - Danish - 13 pages

Siemens EH645MB11M User Manual - Danish - 44 pages

Siemens EH645MB11M Installation Guide - French - 13 pages

Siemens EH645MB11M User Manual - French - 56 pages

Siemens EH645MB11M Installation Guide - Italian - 13 pages

Siemens EH645MB11M User Manual - Italian - 56 pages

Siemens EH645MB11M Installation Guide - Polish, Portuguese - 13 pages

Siemens EH645MB11M User Manual - Portuguese - 24 pages

Siemens EH645MB11M Installation Guide - Swedish - 13 pages

Siemens EH645MB11M User Manual - Swedish - 44 pages

Siemens EH645MB11M Installation Guide - Turkish, Spanish - 13 pages

Siemens EH645MB11M User Manual - Spanish - 24 pages

Siemens EH645MB11M Installation Guide - Norwegian - 13 pages

Siemens EH645MB11M User Manual - Norwegian - 44 pages

Siemens EH645MB11M Installation Guide - Finnish - 13 pages

Siemens EH645MB11M User Manual - Finnish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info