790998
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
Installing the hob
Do not trap cables during installation.
Worktop cut-out, 500 mm deep:
1. Mark the centre of the cut-out
2. Put the hob in place
3. Align the hob surround markings and cut-out
4. Press in the hob.
Connecting the hob
The cooker must be connected to the mains, but switched off.
1. Insert the cooker until the socket is accessible.
2. Screw the PE conductor (green/yellow) for the hob to the
earthing point < of the cooker.
3. Plug in the hotplate connector on the cooker. The colour of
the front cable should match the colour coding on the label.
The lug N on the connector must point to the left.
Slide the cooker in. Do not trap the cable while doing so.
Note: Seal the tile joints on tiled work surfaces with silicone
rubber.
Removing the appliance
Disconnect the appliance from the power supply. Pull out the
cooker a short distance. Pull out the hob connector. Finally
remove the earthing conductor. Push out the hob from below.

1
3(
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EA64RGNA1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EA64RGNA1E in the language / languages: English as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EA64RGNA1E

Siemens EA64RGNA1E User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info