790990
5
Zoom out
Zoom in
Previous page
1/8
Next page
Getting to know your appliance en
5
*Getting to know your
appliance
Get t i ng to know your appl i ance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2
The hotplates
Notes
Any dark areas in the glow pattern of the hotplate
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
sensitive components are protected from
overheating
the appliance is protected from electrical
overload
better cooking results are achieved
With multi-circuit hotplates the heater elements of the
inner filament circuits and the heater element of the
activations may switch on and off at different times.
Combination cooking zone
The single-circuit hotplates can be operated without the
bridge heating element independently of each other or
combined with the bridge heating element as described
in the table.
The small extended cooking zone (1 +3) and the single-
circuit hotplate (2) can also be operated independently
of one another using different heat settings. Different
temperature ranges are therefore generated on the
large roaster, the Teppanyaki or the grill plate, for
example. The small extended cooking zone can then be
used to fry a meal and the single-circuit hotplate
simultaneously used to keep a meal warm.
Note: Suitable cookware is available from the after-
sales service or our e-Shop.
Hotplate and residual heat indicators
The hotplate and residual heat indicators light up when
a hotplate is warm:
Hotplate indicator - during operation, shortly after
you have switched on a hotplate.
Residual heat indicator - after cooking, when the
hotplate is still warm.
You can use the residual heat to save energy, e.g. to
keep a small dish warm or to melt chocolate.
Hotplate Activating and deactivating
$Single-circuit
hotplate
ðDual-circuit
hotplate
Activation: Turn hotplate switch to the right as far
as ð. Setting the heat setting. Switching off:
Turn the hotplate switch to 0 and reset. Never
turn the hotplate switch past the symbol ð to 0.
1 = single-circuit hotplate
2 = single-circuit hotplate
3 = bridge heating element
Combination Activation Suitable for
Small extended
cooking zone:
Combination of 1
+ 3
Turn the hotplate switch to
the right until æ. Setting
the heat setting.
Switching off: Turn the hot-
plate switch to 0 and reset.
Never turn the hotplate
switch past the symbol æ
to 0.
Small roaster
Small Teppanyaki.
Large extended
cooking zone:
Combination of 1
+ 3 + 2
Set the small extended
cooking zone. Set the front
left hotplate using the same
heat setting.*
Large roaster
Large Teppanyaki
Large grill plate
* For even heat distribution, you may have to slightly vary the heat
setting
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens EA645GMA1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens EA645GMA1E in the language / languages: English as an attachment in your email.

The manual is 4.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens EA645GMA1E

Siemens EA645GMA1E User Manual - German, Dutch, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info