Manual Siemens DO05805M (page 11 of 44) (English, German, Dutch, French, Italian)

652212

Zoom out

Zoom in

1/44

Congratulations on purchasing this Siemens appliance. You

have acquired a top-quality product, which will give you a lot

of enjoyment.

Please read this installation and operating instruction

manual carefully, then act accordingly! Store for future

reference.

Installation instructions

Unpacking

■ Inspect the new appliance for transport damage!

■ Please dispose of the packaging, and if applicable, the old

appliance in an environmentally-friendly manner.

Scope of delivery

1 Appliance with operating panel

2 Installation bracket

3 DO3170D5M only:

Mounting (2 screws, 2 wall plugs)

4 Documentation

Product description

The small water heater is only suitable for open (unpres-

surised) installation. It heats and stores drinking water up to

approx. 85 °C. Different temperature levels can be selected

with the temperature selector knob.

The appliance may not be operated with pre-heated water,

as otherwise the safety temperature limitation will trip.

The appliance is connected using the mains plug.

This installation and operating instruction manual describes

various appliance types:

– Undersink appliances with additional drip stop function

and pressure stop DO05705M, DO3170D5M and

DO05705CHM

– Oversink appliances DO05805M and DO05805CHM

Preparations for installation

■ Shut off the water supply before connecting the appli-

ance.

Do n o t insert the mains plug.

■ Remove the installation bracket on the appliance and break

off the retaining rings (A).

■ Fix the connection cable to the rear of the appliance to suit

the required length (B).

Wall mounting

II.

Undersink appliances DO05705M,

DO3170D5M and DO05705CHM

■ Align the appliance on the wall and use the three indents

(top, left and right on the appliance) to apply markings

(A).

■ Connect the markings by a pattern of crossed lines with a

spirit level (B1 and B2).

■ Place the installation bracket on top at the point of inter-

section of the drawn lines and mark the position for the

holes (C).

■ Drill the holes and insert wall plugs (D1).

■ Attach the installation bracket (notch at top) to the wall

using the screws (D2).

■ Suspend the appliance in the installation bracket (D3).

Exchanging appliances

■ When replacing an old Siemens small water heater with

this new appliance, the existing drill holes with wall plugs

can be used. Please note that the new appliance is approx.

2 cm higher.

If the new appliance is to be ﬂush at the top like the old ap-

pliance (E1):

■ Attach the new installation bracket to the wall with the

notches at the top.

If the new appliance is to be ﬂush at the bottom like the old

appliance (E2):

■ Turn the installation bracket around and attach to the wall

with the notches at the bottom.

III.

Oversink appliances DO05805M and

DO05805CHM

■ Align the appliance on the wall and use the three indents

(top, left and right on the appliance) to apply markings

(F).

■ Connect the markings to a pattern of crossed lines with a

spirit level (G1 and G2).

■ Place the installation bracket on top at the point of inter-

section of the drawn lines and mark the position for the

holes (H).

■ Drill the holes and insert wall plugs (I1).

■ Attach the installation bracket (notch at top) to the wall

using the screws (I2).

Exchanging appliances

When replacing an old Siemens small water heater with this

new appliance, the existing drill holes with wall plugs can

be used. Please note that the new appliance is approx. 2 cm

higher.

■ Turn the installation bracket around and attach to the wall

with the notches at the bottom (J).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens DO05805M in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens DO05805M Manual

Product: