Manual Siemens CT836LEB6 (page 42 of 136) (English, German, Dutch, French)

710132

Zoom out

Zoom in

1/136

en Initial use

Button E

Press button E to open the selection

of service programmes. Run the desired

programme as described in the section

“Service programmes”�

Button B

Press button B to open the selection

of “Personalised beverage preparation”�

Personal settings for coee drinks can

be saved and called up (see the section

“ Personalised drinks”)�

Button G

Press button G after selecting a drink to

prepare two cups simultaneously (see the

section “Two cups at once”)�

Press A, E, B

or G again to exit the respective

menu�

Button C

Press C to either begin preparing

a drink or launch a service programme�

Press C again while the drink

is being prepared to prematurely halt

dispensing�

Rotary selector

Turn the rotary selector to navigate in the

display or to change parameters�

Display (Touchscreen)

Information is shown on the display, or

settings can be made by touching the

touchscreen (see the section “Display”)�

Initial use

General

Fill the appropriate container using only

pure, cold, uncarbonated water and solely

roasted beans. Do not use coee beans

that have been glazed, caramelised or

treated with other additives containing

sugar, since they will block the brewing unit�

Before the appliance can be switched

on and used, it must be assembled

and connected according to the

enclosed assembly instructions�

Setting up the appliance

■ Remove any protective plastic lm.

Important: Only use the appliance

in a frost-free room� If it has been

transported or stored at tempera-

tures below 0°C, wait at least 3 hours

before initial use�

■ Take hold of the appliance door by the

recessed grip and open�

■ Remove the water tank, rinse it and ll it

with fresh water up to the “max” mark�

■ Replace the water tank and click into

place�

■ Remove the bean container, ll with

coee beans and replace.

■ Set the mains switch to I and close the

appliance door�

The appliance heats up and is rinsed�

The display is activated�

“Select language” appears�

■ Turn the rotary selector to select the

desired language and touch [ Continue ]

in the display�

“Set water hardness” appears�

It is important to set the water hard-

ness correctly to enable the appli-

ance to accurately indicate when the

descaling programme should be run�

The preset water hardness is level 4�

If a water softener is installed in the

house, please set the water hard-

ness to level 3� You can also check

the water hardness by asking your

local water supplier�

■ Use the enclosed test strip to determine

the water hardness. Briey dip the test

strip in water and check the result after

one minute�

Level Water hardness

German (°dH) French (°fH)

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

■ Turn the rotary selector to set the water

hardness determined�

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens CT836LEB6 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens CT836LEB6 Manual

Product: