607939
20
Zoom out
Zoom in
Previous page
1/64
Next page
en Steam
20
1. Press the menu button.
The operating modes menu opens.
2. Select the "Microwave combination" operating mode.
A type of heating, temperature, microwave output
setting and cooking time are suggested.
3. Touch the appropriate field and use the rotary
selector to set the required values.
4. Press the Start/Stop button to start.
The cooking time starts counting down.
You can change the values. Pause the oven by
pressing the Start/Stop button. Touch the appropriate
microwave field and use the rotary selector to change
the cooking time. Press the Start/Stop button to restart.
The cooking time has elapsed
An audible signal sounds. The cooking compartment
stops heating. x 0 min 00 s appears on the display
and "Finished" appears in the status bar. You can
cancel the audible signal before it has finished by
pressing the 0 button.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door: The operation continues.
Cancelling the operation
Press the On/Off button.
Setting the microwave
To achieve optimum results with the microwave, always
insert the wire rack at shelf position 1.
1. Press the menu button.
The operating modes menu opens.
2. Select the "Microwave" operating mode.
Microwave output settings and a cooking time are
suggested.
3. Touch the required microwave output setting to
select it.
4. Touch the "Cooking time" field and set the cooking
time using the rotary selector.
5. Start the microwave using the Start/Stop button.
The cooking time starts counting down.
You can change the microwave output setting.Pause
the oven by pressing the Start/Stop button.Touch the
appropriate microwave field. Press the Start/Stop
button to restart.
You can change the cooking time at any time while the
operation is running.
The cooking time has elapsed
A signal sounds. The microwave operation has finished.
x 0 min 00 s appears in the display end "Finished"
appears in the status bar. You can cancel the audible
signal before it has finished by pressing the 0 button.
If you want to set a microwave output setting again,
touch the appropriate field and enter a cooking time.
The operation starts again.
Pausing the operation
Press the start/stop button: The oven is paused. Press
the start/stop button again; the operation continues.
Open the appliance door: The operation is interrupted.
After closing the door, press the start/stop button. The
operation continues.
Cancelling the operation
Press the On/Off button.
Dry
With the "Dry" operating mode, the cooking
compartment is heated up and the moisture in the
cooking compartment evaporates. Use the drying
function after every microwave operation.
1. Press the menu button.
The operating modes menu opens.
2. Select the "Dry" operating mode.
3. Press the Start/Stop button to start.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door for 1 to 2 minutes so that the
moisture can escape.
`Steam
Steam
With some types of heating, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheating types of heating are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Noise
Pump
You will hear a humming noise while the pump is in
operation and after switching it off. This noise is caused
by the pump function test. It is a normal operating
noise.
Control panel
You will hear a humming or clicking noise when
opening the control panel. These noises are caused by
the control panel being pushed out. They are normal
operating noises.
(
Grill, large area
*
Grill, small area
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens CN678G4S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens CN678G4S1 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens CN678G4S1

Siemens CN678G4S1 User Manual - German - 72 pages

Siemens CN678G4S1 User Manual - Dutch - 72 pages

Siemens CN678G4S1 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info