607939
16
Zoom out
Zoom in
Previous page
1/64
Next page
en Time-setting options
16
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heat up is
complete.
Applying settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
1. Set the type of heating and temperature.
2. Press the c button.
The c symbol appears on the left next to the
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, a signal sounds. The
c symbol goes out. Place your dish in the cooking
compartment.
Notes
If a cooking time has been set, this runs
independently of rapid heating and counts down
immediately when the operation is started.
You can use the l button to check the current
cooking compartment temperature during rapid
heating.
Cancelling
Press the c button. The c symbol disappears from
the display.
OTime-setting options
Time-setting options
Your appliance has different time-setting options.
Notes
A cooking time of up to one hour can be set exactly
to the minute.
A cooking time over one hour can be set in five-
minute increments.
Depending on which direction you turn the rotary
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
sounds and "Finished" appears in the status bar.
Using the l button, you can request information
during the operation, which then appears briefly in
the display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
1. Press the 0 button.
The field for the timer opens.
2. Use the rotary selector to set the timer duration.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the 0 button to cancel the audible
signal early.
Cancelling the timer duration
Press the 0 button to open the time-setting options
menu and turn the time back. Press the 0button to
close the menu.
Changing the timer duration
Use the 0 button to open the time-setting options
menu and change the timer time in the next few
seconds using the rotary selector. Start the timer with
the 0 button.
:
4D hot air
%
Top/bottom heating
&
Intensive heat

7RSERWWRP
KHDWLQJ
PLQV
$GGHGVWHDP
&
Time-setting option Use
Q
Timer The timer functions like an egg timer. An
audible signal sounds once the set time
has elapsed.
+
Cooking time A signal sounds once a set cooking time
has elapsed. The appliance switches off
automatically.
*
End time Set a cooking time and an end time. The
appliance switches off automatically so
that the operation ends at the desired
time.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens CN678G4S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens CN678G4S1 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens CN678G4S1

Siemens CN678G4S1 User Manual - German - 72 pages

Siemens CN678G4S1 User Manual - Dutch - 72 pages

Siemens CN678G4S1 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info