Manual Siemens Climatix 2 (page 64 of 77) (English)

693647

Zoom out

Zoom in

1/77

INSTRUCTION MANUAL OF THE SIEMENS CLIMATIX 2 CONTROL EQUIPMENT

 to disconnect the controller from the

power source.

 to remove the SD memory card from the

controller by repeatedly pressing the

card.

 if the controller is turned on, the light of

the BSP LED must be green.

 in the case of problems, it is necessary

to repeat the procedure.

10. SAFETY INSTRUCTION

• Before installing, repairing or preserving the control equipment and before connecting

additional attachments, it is necessary to disconnect the appliance from the power supply

and to make sure that all the terminals and circuits are not under voltage.

• The control equipment must be installed in accordance with applicable standards and

regulations.

• The control equipment may be used only in accordance with its intended use.

• The control equipment is designed to be installed in the boiler or close to the boiler.

• The control equipment can be used only in the heating systems that were designed in

accordance with applicable standards and regulations.

• It is necessary to select the parameter values according to the type of the boiler and of

used fuel. Furthermore, it is necessary to become thoroughly familiar with the instructions

for setting these parameters. Incorrect parameter selection may result in disrepair of the

boiler (its overheating, etc.).

salve
chiedo se è possibile fare un by pass per far partire il sistema di condizionamento a causa dell'oscuramento :del controllore POL/STD
grazie
Submitted on 11-3-2022 at 12:44
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Climatix 2 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens Climatix 2 Manual

Product: