71692
12
Zoom out
Zoom in
Previous page
1/22
Next page
en
12
Rest mode
When Rest mode is switched on, the following settings
are switched off:
ʋ Ice maker
ʋ Acoustic signal
ʋ Interior light
ʋ Messages on the display panel
ʋ The background illumination of the display panel is
reduced
ʋ Buttons are locked
Switching on
1. Press and hold down the “super” button refrigerator
compartment.
2. Press Vacation button.
3. Press “super” button and hold down for 3 seconds
longer.
The symbol VACATION flashes on the display panel
and RESTMODE is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Energy saving mode
If the energy saving function (eco function) is activated,
the appliance switches to energy saving operation. This
energy saving function is preset at the factory in order
to reduce energy consumption. The background
illumination of the fascia is likewise reduced.
Switching on
1. Press setup button.
2. Press the selection button , until ECO MODE
and the current setting (OFF) is displayed.
3. Press the setting button #, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
ECO is displayed in the fascia.
Switching off
1. Press setup button.
2. Press the selection button , until ECO MODE
and the current setting (ON) is displayed.
3. Press the setting button $, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
Door rail heater
(for 3-door models only)
To prevent condensation, the door rail heater can be
switched on and off as required.
Switching on
1. Press setup button.
2. Press the selection button , until DRY DOOR
and the current setting (OFF) is displayed.
3. Press the setting button #, in order to reset
the setting.
4. Press the setup button, in order to save the setting.
Switching off
1. Press setup button.
2. Press the selection button , until DRY DOOR
and the current setting (ON) is displayed.
3. Press the setting button $, in order to reset
the setting.
4. Press the setup button, in order to save the setting.
Alarm function
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
Temperature alarm
The temperature alarm switches on if the freezer
compartment is too warm and the frozen food is at risk
of thawing.
The set temperature of the freezer compartment flashes
and “Alarm” is displayed on the display panel.
When the alarm button is pressed, the temperature
display for the freezer compartment indicates for five
seconds the warmest temperature reached
in the freezer compartment.
Then this value is deleted. The temperature display for
the freezer compartment indicates the set freezer
compartment temperature without flashing.
Henceforth the “warmest temperature” will be redefined
and saved.
The alarm display goes out as soon as the set
temperature has been reached again.
The alarm may switch on without any risk
to the frozen food:
ʋ when the appliance is switched on,
ʋ when large quantities of fresh food are placed
in the appliance,
ʋ if the freezer compartment door is open too long.
Switching off the alarm
Press the alarm button to switch off the warning signal.
Usable capacity
Information on the usable capacity can be found inside
your appliance on the rating plate (see diagram at
chapter “Customer service”).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens CI 24 RP 00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens CI 24 RP 00 in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens CI 24 RP 00

Siemens CI 24 RP 00 User Manual - German - 22 pages

Siemens CI 24 RP 00 User Manual - Dutch - 40 pages

Siemens CI 24 RP 00 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info