297680

Siemens c10 Manual

4
Zoom out
Zoom in
Previous page
1/23
Next page
SMS Voicemail Ringer Phonebook Call List SetupQuick-Dial-
List
Private Communication Systems
Mobile Phones
With the C1x (C10, C11 and C12) the first series of the new C class of Siemens
Mobiles are offered to the customer. The intention of this class is to offer entry-level
mobile phones for the mass consumer market.
One of the main differences is the new type of display used: It is an alphanumeric
display which offers 3 lines of text (12 characters
each) plus a dedicated icon-line to access the
different menues.
4 Mechanical Concept
Note: All part numbers refer to mechanical drawing in section 4.1!
The mechanical concept of the C1x mobiles is similar to the one of S6 and E10.
The C1x consists of two boards, the RF & Control module (1000) and the user
interface (MMI board, 1010).
The connection between these two boards is not established by a normal connector
with plug-in contacts, but by a special interconnector (1210) embedded into a
shielding frame (1080). This interconnector is upholding the connection through the
pressure implied on it by the housing.
Caution: Be careful when assembling the interconnector. Avoid any kind of dust or
dirt because it will affect the contacts of the interconnector.
On the MMI board there are no exchangeable components. In opposite to the MMI
board of S6 and E10 there is no ringer on the MMI. The ringer (1220) is placed in the
shielding cover (1090) and connected to the RF&Control module (1000) by a plug
and a cable.
Because the Molex connector is not located at the bottom of the telephone but on it’s
top, there is no need anymore for RF cable mounted to the MMI board and for a RF
plug neither.
The antenna (1150) is not screwed into the lower case shell, but it is a plug-in type.
The keypad (1050), the loudspeaker (1140), the microphone (1130), the dust
protection frame (1070) and the display window (1060) are mounted into the upper
case shell (1020). Make sure that the microphone contact springs are not damaged
when mounting.
When turning in the screws (1160 and 1170) make sure that the right torque is used
(0.25 0.05)Nm, because this will have an effect on the contacts of the
interconnector.
4.1 C1X mechanical drawing
Service Manual C1x V 1.0 PN MP ST
R. Fleuren
Sm_C1x_lvl2_v10_w97.doc Page 4 of 23 09/98
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens c10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens c10 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info