652219

Siemens BK20100M Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
13
en
Congratulations on purchasing this Siemens ap-
pliance. You have acquired a top-quality product,
which will give you a lot of enjoyment.
Please read this installation and operating in-
struction manual carefully, then act accordingly!
Store for future reference.
Installation instructions
Install the water heater as described in the
illustrated section. Observe the instructions in
the text.
The illustrations can be found in the centre of the
instruction manual.
Installation
I.
Parts supplied
II.
Preparations for installation
■ Leave a gap of at least 30 cm above the top edge
of the appliance housing.
5
4
3
2
1
100°C.
Litermax.
min.
min. 30 mm
■ The water heater must be mounted so that it is
absolutely perpendicular. Use a standard pipe
joining piece to compensate for an uneven wall
surface (Fig. VI, 2).
■ For an additional water connection, use a stand-
ard 50 mm branch adapter (Fig. VI, 3).
■ Check the length of the mains connecting cable.
If necessary, fit a longer cable to heater before it
is mounted on the wall (Fig. V).
Attention!
Unplug the heater from the electricity
supply before changing the cable!
■ Installation of the mixer tap (Fig. II, 1–3).
■ Detach the mounting plate from the appliance.
■ Break off the template “S” (Fig. II, 4).
■ Hold the template against the mounting plate
and place it over the mixer tap (Fig. II, 5).
■ Mark the position of the holes for mounting the
plate (Fig. II, 6).
Note: Make sure that the mounting plate is
absolutely horizontal!
Any holes in the wall and rawlplugs that remain
from a previous water heater can be used again.
Simply identify the corresponding holes in the
mounting plate.
■ If the previous water heater was a Siemens
BK0562, bend strap “L” outwards and use the
existing holes and rawlplugs (Fig. II, 7).
III.
Wall mounting
■ Fixing the mounting plate (Fig. III, 1).
■ Insert mains cable “A” into the recess – towards
right or left – depending on position of socket
(Fig. III, 2).
■ Hook the heater onto the mounting plate
(Fig. III, 3).
■ Attach and tighten the water intake and outlet
pipes (Fig. III, 4).
■ Insert the overflow pipe (Fig. III, 5).
IV.
Setting the water flow rate
The maximum water flow rate is 10 l/min, i. e. 1 litre
of water takes 6 seconds to flow into the tank.
■ Open tap “G” fully.
■ Adjust the flow rate by turning throttle screw
“D” on the underside of the mixer unit (1/2 turn
max.).
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens BK20100M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens BK20100M in the language / languages: English, German as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info