575219
6
Zoom out
Zoom in
Previous page
1/11
Next page
39/235
Siemens Schweiz AG Basic units RVS61.843 and RVS41.813 CE1U2355en_02
Landis & Staefa Division Handling 3. Juli 2008
Adjusting the room temperature setpoint
Turn the setting knob to increase or decrease the Comfort setpoint
and confirm by pressing the OK button. During active heating
mode, you can readjust Comfort setpoint “Heating”, and during
active cooling mode, you can readjust Comfort setpoint “Cooling”.
For the Reduced setpoint
Press the OK button
Select menu “Heating circuit” and
Adjust the “Reduced setpoint“
After each readjustment, wait at least 2 hours, allowing the room temperature to adapt.
The Reduced setpoint can only be set in the case of heating mode. In cooling mode,
there is no Reduced setpoint, only the Comfort setpoint.
Occupancy button
If, during the Comfort period, the rooms are not used for short
periods of time, you can press the occupancy button to lower the
room temperature, thus saving heating energy (changeover from
Comfort to Reduced setpoint), or saving cooling energy (changeover
from Comfort setpoint to OFF).
When the rooms are occupied again, press again the occupancy button to return to
normal heating (changeover from Reduced to Comfort setpoint), or to cooling
(changeover from OFF to Comfort setpoint).
In heating mode: In cooling mode:
Heating to the Comfort setpoint
Cooling to the Comfort setpoint
Heating to the Reduced setpoint
Cooling off (no symbol)
The occupancy button is only active in automatic operation
The current selection is active until the next switching action according to the heating
program takes place
Displaying information
Various data can be displayed by pressing the info button.
Depending on the type of unit, configuration and operating state, some of the info lines
listed below may not appear.
Display:
Possible error messages from the “Error code list” page 3
Possible service messages from the “Maintenance code list” page 3
Possible special mode messages
Possible displays
0
4 8 12 16 20 24
AUTO
Raumtemperatur
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AVS37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AVS37 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AVS37

Siemens AVS37 User Manual - German - 258 pages

Siemens AVS37 User Manual - French - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info