61045
4
Zoom out
Zoom in
Previous page
1/11
Next page
2
Gigaset AS150 / English / A31008-M1811-R601-3-TN19 / Wytana.fm / 05.05.2008
Setting up the telephone for use
Step 1: Connecting the base
Connect the phone jack with the phone cord 1
and the mains units (230 V) with the power cord
2 as shown. Place the cords in the cord recesses.
The two cords must be plugged in at all times.
Only use the supplied mains unit (see the bot-
tom of the base) and the supplied phone cord.
If you ever purchase another phone cord from a
store, ensure that the phone conductors are cor-
rectly connected: 3-4 connection of the telephone
conductors/EURO CTR37.
Step 2: Setting up the handset
Fitting the battery pack
To open the battery compartment, push the
tongue on the battery cover inwards (see pic-
ture on left) and lift off the cover.
Fit the left side of the battery pack under the
clips then press down on the right side so that
the pack snaps home.
Plug the jack firmly into the socket (see picture
on right).
To close the battery compartment, position the
cover and press until it snaps home.
Step 3: Registering the handset to the
base and charging the battery pack
Place your handset in the base with the display
facing forwards. The handset will now register
automatically to the base. For procedure see
page 4.
Charging the battery pack
To charge the battery pack, leave the handset in
the base for approx. ten hours. The battery pack is
now fully charged. The charge status of the battery
pack is correctly displayed only after uninterrupted
charging/discharging. You should not therefore
interrupt the charging process.
Charging is electronically controlled to prevent
overcharging. The battery pack heats up during
charging; this is normal and not dangerous. After
a time the charge capacity of the pack will
decrease for technical reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (page 9). Your
telephone is now ready to use.
If you have any queries about the use of your tele-
phone, please read the tips under "Questions and
answers" (page 7) or contact our service (Cus-
tomer Care, page 8).
Activating/deactivating the handset
Press the 'end call' key a and hold.
If you place a deactivated handset in the base sta-
tion or charger, it will automatically activate.
12
W
Place the battery leads in the cable
guides so that the battery cover cannot
catch on the leads and damage them
when it is closed.
Only insert the recommended re-
chargeable battery pack, i.e. never use a
normal battery pack as this could damage
your health and cause injury.
Never use non-Siemens battery charg-
ers as this could damage the battery pack.
Only place the handset in the base/
charging cradle that is intended for it.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AS150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AS150 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AS150

Siemens AS150 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info