296767

Siemens a51 n Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
©
Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\A51_A52 Fox\en\DTC_A52_Main.fm
left page (4) of A52 DTC en, A31008-H6210-A1-1-7619 (12.10.2004, 14:19)
Making a phone call
4
VAR Language: en; VAR issue date: 040915
Prevent accidental activation
Even if PIN use is deactivated (p. 3) con-
firmation is required to switch on the
phone.
This prevents accidental activation of the
phone, e.g. when you are carrying it in a
bag or when you are travelling in an air-
craft.
After pressing and holding the On/Off/End
key
B
select §OK§ to switch on the phone
or abort the operation with
§Cancel§.
Making a phone call
Dialling with number keys
The phone must be switched on (standby
mode). Enter the number (always with
prefix, if necessary with the international
dialling code). Press
§Clear§
to clear the last
digit, press and hold to clear the entire
phone number. To dial press the
Akey.
End call
Press the End key
B
briefly. Press this key
even if the person on the other end of the
line has hung up first.
Set volume
Use the scroll keyEto start adjusting
the volume during conversation. Set vol-
ume with
G.
Redial previous numbers
To redial the phone number last called,
press the Call key
Atwice. To redial other
numbers that were dialled previously,
pick out the required phone number from
the list with
G, then pressAto dial.
When a number is busy
For automatically dialling the phone
number for up to 15 minutes at increas-
ing intervals, press
§Auto dial§. For phone
ringing when the busy number is free,
press
§Call back§ (
L
). Press §Prompt§ and a
beep will remind you to redial the dis-
payed phone number after 15 minutes.
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone.
Press
§Reply§ orA.
If the phone number has been transmitted
by the network, it is displayed. If the number
and the name are stored in the Phonebook,
the corresponding name is displayed in-
stead. If set, an animation can be dis-
played instead of the bell icon.
Reject call
§Reject§ or B press briefly.
Held call
Make a new connection during a call with
y menu§ ¢ Hold ¢
J
(dial new phone
number, also from Phonebook:
F
). With
§Swap§ you can swap back and forth be-
tween both calls.
Additional costs will be incurred for the
2nd phone connection.
Conference b
Make a new connection during a call with
y menu§ ¢ Hold ¢
J
(dial a new phone
number).
With
y menu§ ¢ Conference you can join
the held call. Repeat this procedure until
all participants are linked together (up to
5participants).
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens a51 n at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens a51 n in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info