300330
5
Zoom out
Zoom in
Previous page
1/10
Next page
5
Gigaset A120 / IM-Nord_eng / A31008-M1655-R201-1-7619 / Kentucky.fm / 02.03.2005
Using several handsets
Internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Internal conference/Call connecting
You are in conversation with an external caller.
To confer:
INT (the external party hears the wait melody)¢
Select a handset ¢ c (confer with internal
party).
End:
MENU ¢ GO BACK ¢ OK.
You are reconnected with the external caller.
Or to connect the call:
INT ¢ Select a handset ¢ c (announce the
call if required)
¢ a Press the end call key.
You can also press the end call key
a immedi-
ately (without announcing the call). If the internal
party does not answer or is busy the call will come
back to you automatically.
Barging in on an external call
You are conducting an external call. An internal
party can 'barge in' on your call and join in the con-
versation (all parties hear a beep). Requirement:
The
BARGE IN function is activated.
Activating/deactivating internal barge-in
MENU ¢ BASE SET ¢ ADD FEATURES ¢
BARGE IN ( = on).
Internal barge-in
The display shows LINE IN USE. You wish to barge
in on the call.
c Press the talk key.
You are connected. All parties hear a signal tone.
The display shows
CONFERENCE.
End:
a Press the end call key.
If one of the internal parties presses the end call
key
a, a signal tone sounds. This does not affect
the connection between the other handset and the
external caller.
Looking for a handset ("paging")
If you have mislaid your handset you can page it
with the help of the base. To do this, briefly (2 sec-
onds max.) press the register/paging key on the
front of the base (page 1). All handsets will ring at
the same time.
End paging: Briefly press the registration/paging
key (on the base) or the talk key
c on any hand-
set.
Handset settings
Changing the display language
You can view the display texts in different lan-
guages.
MENU ¢ O 2 ¢ Select language
(e.g. digit combination
Q1 for German):
Activating/deactivating Auto Answer
When you get a call you can simply lift the handset
out of the base or charger without having to press
the talk key
c.
To activate: MENU
¢ O 1 1.
To deactivate: MENU
¢ O 1 Q.
Activating/deactivating battery warning
tone
If this function is activated, a beep sounds in idle
status when the battery pack is almost flat.
To deactivate: MENU
¢ O 4 Q.
To activate: MENU
¢ O 4 1.
INT
Press the display key.
Your own handset is marked "<".
either ...
Call a single handset:
~
Enter number of handset,
e.g.
2.
or ...
Calling all handsets:
P
Press the star key.
... then
Ending the call:
a
Press the end call key.
i
Pressing the registration/paging key for
more than 2 seconds puts the base into
registration mode. The handsets will not
ring in this case.
Q 1
German
Q L
Finnish
Q 2
English Q M Polish
Q I Danish Q N Croat
Q 4 Norwegian Q O Czech
Q 5
Swedish 1 Q Russian
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens a 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens a 120 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens a 120

Siemens a 120 User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info