99293
57
Zoom out
Zoom in
Previous page
1/92
Next page
57
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Wahloptionen.fm
5.7.01
Step
by
Step
Dial options
Centrex features
CENTREX (CTX) is the name of the virtual ISDN PABX. For further information
on CENTREX please consult your provider. To allow the full range of features to
be used, you can also activate the keypad protocol for switching, in addition to
the standard dialling procedures. CENTREX features can only be utilised by
subscribers in a CENTREX group.
Signalling options
You can use the digit keypad to send keypad information elements for
controlling special services. Ask your provider for more details concerning the
information and codes which can be sent.
The following features can be used if your Gigaset 4070/4075isdn is connected
to a Centrex system.
In conjunction with a PABX
Prefixes (access codes)
If your telephone is connected to a PABX, you may initially have to enter a prefix
(access code) for external calls. Please refer to the operating instructions for
your PABX. The prefix can consist of one to four digits.
In the case of incoming calls, the prefix is automatically added to the callers
number in the display, in the missed calls list and thus also in the telephone
directory (if copied there from the missed calls list). The number stored can be
dialled directly from the missed calls list (see page 34).
Entering a prefix (access code)
Press

or *for selection menus.
Select using [
] and [OK]:
Service Set up
or
Base Set up
o
Settings
o
System
settings
o
Prefixes
.
Confirm with [
9
] and enter the desired code.
Select using [
 :
] and [OK]:
GHOHWHFKDQJHRULQVHUW
Confirm with [
9
] and select
Save entry
followed by [OK].
:KHQGLDOOLQJPDQXDOO\RUHQWHULQJWHOHSKRQHGLUHFWRU\HPHUJHQF\RU'66
QXPEHUVWKHSUHIL[PXVWEHVSHFLILHGH[SOLFLWO\
Calling Name
Identification
(CNI)
In the case of incoming calls from other CENTREX
subscribers, the call number and the callers name are
shown on the display.
Message
Waiting
Indication
(MWI)
When the comfort handset is in standby, the softkey [
,
] is
displayed if new calls have been entered to the missed
calls list.
When you call up the missed calls list, the [
,
] softkey is
deleted.
CENTREX calls
CENTREX calls are signalled acoustically like internal calls.
1.
2.
3.
4.
3.
Info
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens 4170 isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens 4170 isdn in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens 4170 isdn

Siemens 4170 isdn User Manual - German - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info