99293

Siemens 4170 isdn Manual

44
Zoom out
Zoom in
Previous page
1/92
Next page
44
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Anlage.fm
5.7.01
Step
by
Step
If you have also entered a rate (see Section , “Entering the price per unit”) the
call costs will be multiplied by this rate. You can also use a rate if you want to
bill for higher call costs, otherwise disable the rate (the cost display is to be
increased by factor 2, for example).
Setting up “Units from CO”
for
(Gigaset 3000 Comfort)
Press

for selection menus.
Select using [
] and [OK]:
Service Set up
o
Settings
o
System settings
o
Costs
for
(Gigaset 4000 Comfort)
Press
*
for the selection menus.
Select using [
] and [OK]:
Costs
.
Enter the PIN and confirm with [OK].
Select using [
] and [OK]:
Access type
.
Select using [
] and [OK]:
Units Centr.Off.
If the item is marked, the units transmitted by the provider will be displayed or
used to calculate the costs. If the default setting “No Rate” is used, the units
will be displayed.
Entering the price per unit
Before the charges for each call can be calculated, the currency and price per
unit must be defined (the default setting is “No Rate”). For determining the
costs, “Units from CO” must be set (default).
for Gigaset 3000 Comfort
Press

for selection menus.
Select using [
] and [OK]:
Service Set up
o
Settings
o
System settings
o
Costs
for
Gigaset 4000 Comfort
Press
*
for the selection menus.
Select using [
] and [OK]:
Costs
.
Enter the PIN and confirm with [OK].
Select using [
] and [OK]:
Access type
.
Select using [
] and [OK]:
Rate --.--
(with decimal point) or
Rate ----
(without decimal point).
Enter the basic price and confirm with [
9
].
Select using [
] and [OK]:
Save entry
.
If you would like to set an additional currency:
Enter the currency and confirm [
9
].
Select using [
] and [OK]:
Save entry
.
If [No Rate] was already set a prompt is displayed.
Confirm the prompt for accounting method with [YES].
All accounts are reset and the option is highlighted.
Info
1.
2.
1.
2.
3.
4.
5.
1.
2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens 4170 isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens 4170 isdn in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens 4170 isdn

Siemens 4170 isdn User Manual - German - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info