99293
18
Zoom out
Zoom in
Previous page
1/92
Next page
18
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
inbetriebnahme.fm
5.7.01
Step
by
Step
Select an unassigned internal call number (11 -18) with [
] and confirm with
[OK]. Successful registration is confirmed on the display.
Registering the Gigaset 3000 Classic handset
Switch on the handset with a
long
press on the

key
.
Press
z
{
~
in sequence.
Enter the base station number, generally 1, and confirm with [OK]. The
symbol initially flashes, but then remains steadily lit when the connection to
the base station has been established.
Enter the PIN of the base station (factory setting: 0000) and confirm with [OK].
Press the green illuminated key on the base station, the key flashes steadily.
Select an unassigned internal call number (11 -18). The handset is then
successfully registered (the symbol indicating readiness for registration stops
flashing).
Registering the Gigaset 4000 Classic handset
Press the green illuminated key on the base station, the key flashes steadily.
The base station is only ready for registration as long as the key flashes.
Switch on the handset with a
long
press
on the
C
key
Confirm Register? with [YES].
Enter the system PIN of the base station (factory setting: 0000) and confirm
with [OK].
The handset is registered. The next internal number is automatically assigned
to the Gigaset 4000 Classic handset.
Registering other devices
If you also wish to register other handsets (such as Gigaset 2000S or GAP
handsets) or cordless devices (such as Gigaset 1000 TAE or STA) please select
internal call numbers 11 to 15. These devices are not called on numbers
16 to 18.
Please refer to the relevant operating instructions for information on the
registration procedures.
A Gigaset repeater for increasing the range of the handsets does not require a
free registration location. You can register up to 6 Gigaset repeaters at a single
base station.
Deregistering devices
A cordless device can be deregistered from any registered Comfort handset
from Gigaset 2000 C on. All devices that remain registered retain their previous
internal call numbers.
Press

or *for selection menus.
Select using [
] and [OK]:
Service
or
Base Set up
o
Einstellungen
o
Teiln.einrichten
o
Gerät abmelden
.
This opens a list of internal numbers.
Select using [
]:
(required internal number)
.
Press [OK] to deregister the device with the chosen internal number.
5.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
1.
2.
3.
4.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens 4170 isdn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens 4170 isdn in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens 4170 isdn

Siemens 4170 isdn User Manual - German - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info