637073

ShopVac Classic 30 Manual

9
Zoom out
Zoom in
Previous page
1/71
Next page
8
English
Safety instructions for wet and dry vacuum cleaners
Before start-up please read these instructions!
If, on unpacking the unit, you discover dam-
age has been caused in transit please con-
tact your sales office.
Before start-up please read the operating
instructions for your unit and comply in par-
ticular with these safety instructions.
The warning and information signs attached
to the unit provide important information for
safe operation.
Apart from the information in the operating
instructions, comply with the general safety
regulations and regulations for the preven-
tion of accidents.
Power supply
The voltage indicated on the rating plate
must correspond to the voltage of the power
source.
Class I units may only be connected to
properly earthed power sources.
Only use or replace power supply cables for
this unit which correspond to the types indi-
cated by the manufacturer. Comply with the
maintenance instructions. See the operating
instructions for the order no. and types.
Never touch the mains plug with wet hands.
Do not run over, crush or pull the power
supply cable or extension lead, otherwise it
may be damaged. Protect the cable from
heat, oil and sharp edges.
When replacing couplings on the power
supply cable or extension lead the spray
water guard and mechanical stability must
remain intact. Comply with the maintenance
instructions.
Do not use a hose or high pressure water
spray to clean the unit (danger of short-cir
-
cuits or other damage).
Application
Before use, check that the unit and operat-
ing equipment, in particular the power sup-
ply cable and the extension lead, are in per-
fect condition and are safe to operate.
Never suck up explosive liquids, combustible
gases, explosive dusts or undiluted acids
and solvents! Substances to avoid also
include petrol, paint thinner and fuel oil
which could form explosive fumes or mix-
tures by being in turbulence with the air
under suction. In addition, the list includes
acetone, undiluted acids and solvents as
well as aluminum and magnesium dusts.
These substances can also attack the mate-
rials used in the unit.
Do not draw in burning or glowing objects.
Do not direct the unit at people or animals.
The appropriate safety regulations must be
observed when using the unit in dangerous
areas (e.g. petrol stations). It is forbidden to
operate the unit in potentially explosive loca-
tions.
Operation
The operator must use the unit in accor-
dance with the regulations. He/she must
take local conditions into account and be
aware of other people, especially children,
when operating the unit.
The unit may only be used by persons who
have been instructed in how to use it or who
have proved their ability to operate it and
who have been expressly commissioned to
use it.
The unit may not be operated by children or
by the frail and infirm without supervision.
Never leave the unit unattended unless you
have switched it off and pulled out the main
power plug.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ShopVac Classic 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ShopVac Classic 30 in the language / languages: All languages as an attachment in your email.

The manual is 18,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info