798025
14
Zoom out
Zoom in
Previous page
1/24
Next page
More user manuals on ManualsBase.com
3/28/2008 14
The Powerchair will not function while the drive
mechanism is disengaged (in freewheel).
Both left and right sides must be in drive mode for power chair
to operate. Otherwise the Powerchair motors will spin, but the
unit will not move, until both freewheel levers are engaged. Unit
will spin in circles if only one side is in drive mode.
*** DO NOT PUT INTO DRIVE MODE WHILE MOTORS ARE
SPINNING ****
6Runner – 888WNLM, 888WNLLHD & 858WM
The drive/freewheel levers are found toward the rear of the Powerchair
on 888WNLM and 888WNLLHD (Figure 4A). On the 858WM freewheel
levers are located under the front part of the seat (Figure 4B), both
have yellow colored handles. These levers will allow you to disengage
the drive mechanism (When the levers are pulled out away from the
unit) the Powerchair is in freewheel mode. ***NOTE*** the VSI will not
work in Freewheel mode. When the levers are pushed in (towards the
inside of the unit) the motors are engaged and the powerchair is in drive
mode.
Freewheel lever **NOTE** There is a lever on opposite side
FIGURE 4
A
Sticker will also help indicate in which position
the brakes are locked or unlocked.
FIGURE 4B
Freewheel lever
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shoprider 6Runner 10 DLX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shoprider 6Runner 10 DLX in the language / languages: English as an attachment in your email.

The manual is 0.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info