618049
20
Zoom out
Zoom in
Previous page
1/54
Next page
20
Wisdom 3 DC Manual
© 2002 Design, 2011 Doc. No. 12-5274-r01 (8/31/11)
PC INTERFACE MODE
While the TIME/WET screen is displayed, data can be downloaded from the Wisdom 3 or settings can be
uploaded to it, by connecting the Wisdom 3 to a compatible PC using a special PC Interface Cable (USB) and
setting up the PC program.
When the cable is connected, a PC screen will be displayed for 2 minutes, or until the data transfer is com-
plete if less.
While the PC screen is displayed, the buttons on the Wisdom 3 will be disabled. Interruption of the connec-
tion will only occur if the cable is disconnected during the countdown.
PC screen (Fig. 31)
Alpha graphic PC
• Countdown Timer from 119 to 00 (seconds)
Data Download and/or Settings Upload action is initiated by the PC program (no buttons need to be pressed
on the Wisdom 3).
If PC action is not initiated by the time the countdown timer reaches 00 (seconds), the unit automatically re-
verts to the TIME/WET screen.
ENTERING SETTINGS
The Wisdom 3's Settings are divided into groups consisting of Modes/Basics, Alarms, Utilities, and Time/
Date. Except for FO2, settings can also be changed using the PC Interface program.
Set 1 (Modes/Basics) - Operating Mode (Air, Nitrox, or Gauge), PO2, FO2, Nitrox Default
Set 2 (Alarms) - All (On/Off), Ascent, Depth, Turn/End Press, Reserve Time, Deco, PO2 (On/Off)
Set 3 (Utilities) - Wet Activation (On/Off), Units of Measure, Sample Rate, Deep Stop
Set 4 (Time) - 12/24 Hour Format, Am/Pm, Time, Date
While the TIME/WET screen is displayed, pressing the front (Advance) button 7 times accesses the SET GO
TO screen (TIME > DATA > PLAN > LAST > LOG > HIST > SIMU > SET).
SET GO TO screen (Fig. 32)
Alpha graphics SET and Go to -
Pressing the side (Select) button scrolls through the SET 1 (Fig. 33), SET 2, SET 3, SET 4 GO TO screens.
SET 2, 3, and 4 screens are similar to SET 1.
Release of the button freezes the SET screen selected, then you have up to 2 minutes to press the front (Ad-
vance) button to access the rst parameter of that Set Group.
SET 1 GROUP (MODES/BASICS)
Pressing and releasing the side (Select) button 1 time while the SET GO TO screen is displayed, accesses the
SET 1 GO TO screen.
Pressing and releasing the front (Advance) button while SET 1 is displayed, accesses the SET OPERATING
MODE screen with the set point ashing.
Fig. 31 - PC Mode
Fig. 32 - Set Mode
Fig. 33 - Set 1 Group
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood Wisdom 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood Wisdom 3 in the language / languages: English as an attachment in your email.

The manual is 8,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info