572502
14
Zoom out
Zoom in
Previous page
1/62
Next page
ENGLISH
14
LISTENING TO A PROGRAM SOURCE
Basic Operation
Notes:
• Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 11 for details
about operation.
• Before operating this receiver, first set this unit as desired for optimum performance, doing the setup procedures. (For
details, refer to "SYSTEM SETUP" on page 18.)
• Each time the POWER ON/STANDBY button is pressed,
the unit is turned on to enter the operating mode (the
POWER ON/STANDBY indicator lights up blue) or off to
enter the standby mode(the POWER ON/STANDBY
indicator lights up amber).
• On the remote control, press the POWER ON button to
enter the operating mode or press the STANDBY button
to enter the standby mode.
Standby mode
This means that the unit is not disconnected from the AC
mains and a small amount of current is retained to support
the operation readiness.
1. Turn the power on.
3. Select the digital or analog input connected as
desired.
2. Select the desired input source.
• Each time the INPUT SELECTOR button on the front
panel, the input source changes as follows :
FM SAT TV AUX BD/DVD
(frequency display)
• Each time the “TUNER” button on the remote control is
pressed, the FM mode changes as follows:
FM ST FM MONO
Note :
• During playback of BD Video or DVD Video on the BD
player, if an input source is selected and then BD/DVD
is selected within 3 minutes again, playback will be
paused on that point at which an input source is
selected.
When SAT, TV, AUX is selected as an input
source
• Each time this button is pressed, the corresponding
input is selected as follows :
ANLG(Analog) COAX(Coaxial) OPTI(Optical)
Note:
• When the selected digital input is not connected, the
“DIGITAL” indicator flickers and the analog input is
automatically selected.
• When playing back the program sources with surround
sound, refer to "ENJOYING SURROUND SOUND" on
page 17.
4. Operate the selected component for playback.
6. To mute the sound.
5. Adjust the (overall) volume to a comfortable
listening level.
• "MUTE" is displayed.
• To resume the previous sound level, press it again.
7. To listen with the headphones.
• Then the “SPK OFF” is displayed and the sound from
the speakers is cut off.
Note:
• Be careful not to set the volume too high when using
headphones.
VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood VR-654BD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood VR-654BD in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info