ENGLISH
8
• You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the
AUDIO OUTs to the AUDIO INs of DVD (, AUX, CD, etc.) of your amplifier or receiver.
• To connect these jacks correctly, refer to "Connecting AUDIO OUTs" and "Connecting VIDEO OUTs" on the previous page.
Notes:
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cord which converts stereo audio
output to monaural.
• Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed due to the
copy protection function.
CONNECTING TO TV WITH AUDIO AND VIDEO INS
• For some countries like Europe, the unit incorporates the A/V SCART OUTPUT connector.
• You can connect the unit to TV easily using the SCART connections without other cumbersome audio and video connections.
• During operation of the unit, this connector can deliver either the composite (regular) or RGB video signals as well as the
audio L and R signals.
• To obtain the highest picture quality, you can make the COMPONENT VIDEO connections between the unit and TV.
• Depending on the video signal(s) to be used, you should select the video output signal correctly and set your TV to the
corresponding one to match the selected signal on the unit.
(Refer to "SELECTING THE VIDEO OUTPUT SIGNAL" on page 27 and the operating instructions of the component(s)
connected.)
• To listen to analog audio signal that is outputting from this connector, you should set the DOWNMIX correctly. (Refer to
"SETTING THE AUDIO SETUP" on page 35.)
Note:
• In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy
protection function.
CONNECTING TO TV WITH SCART CONNECTOR (Regional Option)