139419
33
Zoom out
Zoom in
Previous page
1/62
Next page
33
SETTING THE VIDEO SETUP
Then the setting menu of the selected item is displayed.
1
Press the CURSOR / buttons to select the preferred item.
RC
󳂮When selecting the HDMI OUTPUT
Notes:
When the HDMI OUTPUT is set to ON, the interlacing video signals will be output from the COMPONENT VIDEO OUTPUT 1
and 2 jacks regardless of the SCAN TYPE setting.
Only when the HDMI OUTPUT is set to ON, you can set the HDMI FORMAT and VIDEO OUTPUT to your preference.
Only when the HDMI OUTPUT is set to OFF, you can set the SCAN TYPE and PROGRESSIVE mode to your preference.
󳂮When selecting the HDMI FORMAT
You can select the format of video signals to be output from the HDMI OUTPUT connector depending on the TV connected to
this unit.(For details, refer to the operating instructions of TV.)
Notes:
When the HDMI OUTPUT connector is connected to the DVI INPUT connector of the TV, etc., if the HDMI FORMAT is set to
YCBCR, no picture may be shown. Should this happen, set it to RGB NORMAL or RGB ENHANCED.
When the HDMI FORMAT is set to RGB NORMAL, if the black may seem to stand out depending on the connected TV, set it
to RGB ENHANCED.
Item menu
HDMI OUTPUT : When outputting signals from the HDMI OUTPUT connector
or not.
HDMI FORMAT : When outputting either the component or the RGB video
signals from the HDMI OUTPUT connector.
VIDEO OUTPUT : When outputting the video signals in the desired resolution
from the HDMI OUTPUT connector.
SCAN TYPE : When outputting either the conventional interlacing video signals
or the progressively scanned video signals from
the COMPONENT VIDEO OUTPUTs.
PROGRESSIVE SCAN MODE : When selecting the method of progressive
conversion according to the type of content
being played back.
TV DISPLAY : When selecting a picture size according to the aspect ratio of
your TV's screen
TV SYSTEM : When selecting the desired video signal format to match that of
your TV monitor and DVD to be played.
SCART VIDEO : When selecting the desired video signal(s) to be output from
the unit's A/V SCART OUTPUT connector.
(Regional option for Europe, etc. only)
BLACK LEVEL : When adjusting the intensity of black.
Setting menu
VIDEO SETUP
HDMI OUTPUT
HDMI FORMAT
VIDEO OUTPUT
SCAN TYPE
P-SCAN MODE
TV DISPLAY
TV SYSTEM
SCART VIDEO
OFF
ON
BLACK LEVEL NORMAL
DARKER
OFF : When outputting no signals from the HDMI OUTPUT connector.
ON : When outputting the signals from the HDMI OUTPUT connector.
HDMI OUTPUT
HDMI FORMAT
VIDEO SETUP
OFF
ON
YCBCR : When outputting the component (YCBCR) video signals from
the HDMI OUTPUT connector.
RGB NORMAL : When outputting the RGB video signals with a digital
RGB video level(data range) of 16(black) to 235(white).
RGB ENHANCED : When outputting the RGB video signals with a digital
RGB video level(data range) of 0(black) to 246(white).
HDMI OUTPUT
HDMI FORMAT
VIDEO OUTPUT
SCAN TYPE
YC
BCR
RGB NORMAL
RGB ENHANCED
VIDEO SETUP
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood sd 871 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood sd 871 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood sd 871

Sherwood sd 871 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info