572505

Sherwood RX-773 Manual

6
Zoom out
Zoom in
Previous page
1/35
Next page
ENGLISH
4. CONNECTING SPEAKERS
• You can connect up to four pairs of speakers to this receiver
and select the various combinations of speakers according to
your tastes.
• The speakers C and D can be installed in the main room as
the speakers A and B can or in the another room (ROOM2)
for ROOM2 playback. (For details, refer to "ROOM2
PLAYBACK" on page 24.)
• Be sure to connect speakers firmly and correctly according to
the channel (left and right) and the polarity (+ and -).
• If the connections are faulty, no sound will be heard from the
speakers, and if the polarity of the speaker connection is
incorrect, the sound will be unnatural and lack bass.
■Notes :
• For safe amplifier operation, use the speakers with
impedance of over 8Ω when you connect a pair terminals of
SPEAKER A and B terminals or/and a pair terminals of
SPEAKER C and D terminals and use the speakers with
impedance of over 16Ω when you connect both SPEAKER A
and B terminals or/and both SPEAKER C and D terminals.
• Do not let the bare speaker wires touch each other or any
metal part of this receiver. This could damage this receiver
and/or the speakers.
6
Speaker A
(Main room)
Speaker C
(Main room/ROOM2)
Speaker B
(Main room)
Speaker D
(Main room/ROOM2)
Right Left Right Left
Right Left
Right Left
5. CONNECTING PC FOR UPGRADES
• This receiver incorporates RS-232C terminal that may be
used in the future to update the operating software so that it
will be able to support new digital audio formats, external
control by using an external device and the like.
■Notes:
• Programming for upgrades and external control requires
specialized programming knowledge and for that reason we
recommend that it only be done by qualified installers. For
more information on future upgrades and external control,
visit the Sherwood web site at www.sherwoodamerica.com or
contact your dealer.
• Do not disconnect the connection cable while updating the
operating software, etc.
Should this happen, it may be result in malfunction or cause
damage to the unit.
PC with RS-232C port
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood RX-773 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood RX-773 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info