11
Operations
When the POWER ON button on the remote con-
trol or the BAND button on the front panel is
pressed, this unit is turned on to enter the operat-
ing mode (the STANDBY indicator lights up in
blue).
In the standby mode, if an INPUT SELECTOR but-
ton on the remote control is pressed, the unit is
turned on automatically and the desired input is
selected.
In the operating mode, when the STANDBY button
on the remote control is pressed, then it enters the
standby mode.
Then the corresponding speaker indicator ("A"
or/and "B") lights up and the sound can be heard
from the speakers connected to the selected
speaker terminals.
When using the headphones for private listening,
press the corresponding SPEAKER button to
switch off both A and B speakers.
Before operation
• This unit enters the standby mode and the
STANDBY indicator lights up in amber.
This means that the receiver is not disconnected
from the AC mains and a small amount of current is
retained to support the operation readiness.
• To switch the power off, push the POWER switch
again. Then the power is cut off and the STANDBY
indicator goes off.
Push the POWER switch.