Manual Sherwood RD-7503 (page 57 of 69) (English)

459229

Zoom out

Zoom in

1/69

ENGLISH

SETTING THE CH LEVEL SETUP

■Note :

• Depending on the speaker settings("NO", etc.), some

channels cannot be selected.

• You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory

("CALIBRATE"), not into preset memory("REFERENCE 1", "REFERENCE 2").

• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit

your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 26.)

• The LFE level can be adjusted within the range of -10 ~ 0 dB

and other channel levels within the range of -15 ~ +15 dB

• In general, we recommend the LFE level to be adjusted to 0

dB.(However, the recommended LFE level for some early

DTS software is -10 dB.) If the recommended levels seem too

high, lower setting as necessary.

Adjusting the current channel level

■When adjusting the LFE LEVEL

①. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the LFE LEVEL SETUP, then press the ENTER

button.

②. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired program source.

Memory mode

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired channel.

3. Repeat the above steps 1 and 2 to adjust each channel level.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the level of the selected channel or program

source's LFE as desired.

RD-7503(A) 2008.11.4 1:45 PM 페이지 57

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood RD-7503 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood RD-7503

Sherwood RD-7503 User Manual - German - 65 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sherwood RD-7503 Manual

Product: