489151
24
Zoom out
Zoom in
Previous page
1/51
Next page
ENGLISH
24
When selecting the “DRC (Dynamic Range Control)”
• This function compresses the dynamic range of previously specified parts of Dolby Digital, Dolby TrueHD, Dolby Digital
Plus, DTS, DTS-HD High Resolution Audio or DTS-HD Master Audio sound track (with extremely high volume) to minimize
the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track
when watching movies at night at low levels.
AUTO* : To adjust the level of dynamic range automatically.
MAX : To adjust it to “MAX” level.
MID : To adjust it to “MID” level.
OFF : To turn the DRC function off.
* : Valid only when the digital signals from the Dolby TrueHD source are being input.
When selecting the “LFE (LFE level)”
• Some Dolby Digital or DTS source, etc. includes LFE (ultra low bass) signals.
• The LFE level can be adjusted as desired.
OFF : To output no sound from the LFE channel.
0 : In general, to set to 0dB (recommended value)
-10: To set to -10 dB for some early DTS software, etc.
When selecting the “HDMI (HDMI Audio Out)”
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
Depending on whether the digital audio signals input into the HDMI IN are output from the HDMI MONITOR OUT of this
receiver or not, you should set the HDMI AUDIO OUT correctly.
AMP : Not to output the HDMI digital audio signals from the HDMI MONITOR OUT of this receiver, meaning these signals
are heard from the speakers connected to this receiver.
THRU : To output the HDMI digital audio signals from the HDMI MONITOR OUT, meaning these signals are heard from the
speakers of your TV.
Note :
• When the HDMI Audio Out is set to THRU, no sound will be heard from the speakers connected to this receiver (except
ROOM 2 speakers) even though any input source is selected.
When selecting the “A.DLY (Auto Delay)”
• This function automatically corrects the audio-to-video delay between components with the HDMI connection.
OFF : To turn off the Auto Delay function.
ON : To turn it on.
Note :
• This function is valid only when the connected display component supports the automatic audio/video synchronizing
capability (“Lip-Sync”) for HDMI. If the automatically set delay time is unsuitable, set it to OFF and adjust the delay time
manually. (For details on the auto delay feature, refer to the operating instructions of the display component.)
When selecting the “C.WIDTH (Center Width)”
• This adjusts the center image so it may be heard only from the center speaker, only from left/right speakers as a phantom
image, or from all three front speakers to varying degrees.
• The control can be set in 8 steps from 0 to 7 (default value : 3)
Note :
• This control valid only when the center speaker is not set to NO.
When selecting the “DIMEN (Dimension)”
• This gradually adjusts the sound field either towards the front or towards the rear. The control can be set in 7 steps from -3
to +3 (default value : 0)
When selecting the “PNRM (Panorama)”
• This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side
wall imaging. Select “OFF” or “ON” (default value : OFF).
Continued
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood R-904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R-904 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood R-904

Sherwood R-904 User Manual - German - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info