Manual Sherwood R-904 (page 17 of 51) (English)

489151

Zoom out

Zoom in

1/51

ENGLISH

Programming a macro function

• The macro function enables you to program a

series of button operations(up to 10) on this

remote control into a single button.

• You can store up to three separate macro

command sequences into “M1”, “M2” and “M3”

buttons.

• If the macro mode is entered, the LED will flicker

once.

Example: When programming a series of button

operations into “M1” button.

1. Press and hold down both “ENTER” button and

one of three NUMERIC buttons (“1” ~ “3”)

corresponding to “M1”~”M3” buttons for more

than 1 second.

■Note :

You should press the corresponding DEVICE

buttons before pressing each operation button.

Example: When playing a BD on the BD player

connected to VIDEO 2 jacks of this

receiver.

①. Press “AVR” button to control this receiver.

②. Press “POWER ON” button to turn this

receiver on.

③. Press “AVR” button to control this receiver.

④. Press “VIDEO 2(7)” button to select the

desired input source.

⑤. Press “BD” button to control the BD player.

⑥. Press “POWER ON” button to turn the BD

player on.

⑦. Press “BD” button to control the BD player.

⑧. Press “▶” button to start playback.

2. Press the operation buttons you want to

program in order.

3. Press “ENTER” button.

• If the programming is performed successfully, the

LED will flicker twice.

■To remove a macro program

• When removing a macro program, perform the

above steps 1 and 3, but ignore the step 2.

■To change a macro program

• When a new macro program is stored into a

MACRO button with performing the above steps

1 to 3, the previous macro program is cleared

from the memory of the MACRO button.

Operating a macro function

■Notes:

• The codes programmed into a MACRO button will be

transmitted at an interval of 0.5 seconds. However,

some components may not be able to complete one

operation in 0.5 seconds and may miss the next code.

In this case, the macro function cannot control the

corresponding components correctly.

• Be sure to use the remote control within the remote

control operation range of the components.

• Depending on the operation status of the components,

etc., the macro function cannot control the

corresponding components correctly.

• Aim the remote control at the REMOTE SENSORs of

the components to be controlled and press the MACRO

button you want.

Example: When pressing “M1” button.

R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R-904 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood R-904

Sherwood R-904 User Manual - German - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sherwood R-904 Manual

Product: