ENGLISH
30
• When playing back the program sources with
surround sound, refer to "ENJOYING
SURROUND SOUND" on page 34.
• If the AUDIO MODE is set to the mode other
than "DIGITAL" for the corresponding input
source on the INPUT SETUP menu, you cannot
hear the sound from the selected digital input.
(For details, refer to "SETTING THE INPUT
SETUP" on page 53.)
When CD, AUX, VIDEO 1~ 4 is selected as
an input source
■Notes:
• When the selected digital input is not connected,
the "DIG." indicator flickers and no sound will be
heard.
• The selected digital input is automatically
assigned to the corresponding input source on
the INPUT SETUP menu. (For details, refer to
"SETTING THE INPUT SETUP" on page 53.)
• The sound from the component connected to the
selected digital input can be heard regardless of
the selected input source.
Muting the sound
• "MUTE" flickers.
• To resume the previous sound level, press it again.
4. Press the AUDIO ASSIGN button.
6. Operate the selected component for playback.
7. Adjust the (overall) volume.
• Each time the MULTI CONTROL knob is rotated
or the CURSOR LEFT(◀)/RIGHT(▶) buttons are
pressed, the corresponding input is selected as
follows :
5. Select the desired of the digital inputs connected
while displaying "AUDIO ~ ".
• "AUDIO ~ " is displayed for several seconds.
• "AUDIO ~ " disappears, press the AUDIO ASSIGN
button again.
