Manual Sherwood R-872 (page 21 of 81) (English)

572503

Zoom out

Zoom in

1/81

ENGLISH

• If any of buttons fails to operate as they should,

start from the step 1

again to enter the correct setup

code.

󰥒Note :

• Manufacturers may use different setup codes for

the same product category. For that reason, it is

important that you check to see if the code you

have entered operates as many controls as

possible. If only a few functions operate, check to

see if another code will work with more buttons.

6. Operate the component using the corresponding

function buttons.

4. While "PRESET" is displayed, press the ENTER

button to store the setup code.

5. Operate the component using the corresponding

function buttons.

6. Repeat the above steps 1 to 5 for each of your

other components.

1. Turn on the component you want to operate.

2. Perform the steps 3 and 4 in "Entering a setup

code" procedure on page 20 to select the setup

code mode ("CODE").

3. While "PRESET" is displayed, search a setup

code, aiming the remote control at the remote

sensor on the component.

7. Repeat the above steps 1 to 6 for each of your

other components.

Searching a setup code

• Each time the CURSOR UP(▲)/DOWN(▼)

buttons are pressed, the setup code is selected

one by one.

• If the selected code is correct, your component

will be turned off.

• When your component is not turned off, repeat

this step until you find one that works.

• In addition to enter a setup code using "Setup

Code Table" on page 74, it is also possible to

search through all the codes that are stored in the

library of this remote control.

• Then "OK" is displayed on the LCD screen.

• If any of buttons fails to operate as they should,

start from the step 1 again to find the correct

setup code.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R-872 in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sherwood R-872 Manual

Product: