572504

Sherwood R-871 Manual

54
Zoom out
Zoom in
Previous page
1/76
Next page
53
ENGLISH
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the AUTO SETUP, then press the
ENTER button.
2
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the START, then press the ENTER
button
3
• Loud test tones are output from each speaker and then if measurements at the first position have been completed,
"SECOND POSITION" message will be displayed.
Place the microphone on a flat level at the second main listening position.
4
• For optimum effectiveness, place the microphone at the second main position within the listening area surrounded by
the speakers.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select "CONTINUE", then press the ENTER
button
5
• Loud test tones are output again successively and then if a series of auto setup procedure has been completed,
"COMPLETE" will be displayed.
• To stop the auto setup procedure while performing it, (press the CURSOR UP(▲)/DOWN(▼) buttons to select
"CANCEL THE AUTO SETUP",) then press the ENTER button.
In such a case that the auto setup procedure is stopped before "COMPLETE", the results of each adjustment may
not be memorized.
• If there may be a problem with front speakers or microphone connection, error message will be displayed. In this case,
turn off the power, check the connection and then retry the auto setup procedure.
■Notes :
• Before starting auto setup, be sure not to set the SPEAKER button to off.
• Because the test tones are loud, ensure there no infants or small children in the room.
• For best results, ensure the room is as quiet as possible during the auto setup procedure.
If there is too much ambient noise, the results may not be satisfactory.
When measurements at first position have been completed.
When the auto setup has been completed.
Continued
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood R-871 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R-871 in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood R-871

Sherwood R-871 User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info