ENGLISH
36
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the band
changes as follows :
→ FM STEREO → FM MONO → AM
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono
mode ("STEREO" goes off) to reduce the noise,
then FM broadcasts are reproduced in monaural
sound.
• Manual tuning is useful when you already
know the frequency of the desired station.
• After selecting the desired band, press the
TUNING UP(+) / DOWN(-) buttons repeatedly
until the right frequency has been reached.
Manual tuning
Select the desired band.
1
• Auto presetting function automatically searches
for FM stations only and store them in the
memory.
• While listening to radio broadcasts, press and hold
down the MEMORY/ENTER button for more than
2 seconds.
• Then "AUTO MEMORY" flickers
and this receiver starts auto
presetting.
• Up to 30 FM stations can be
stored.
Notes:
• FM stations of weak strength
cannot be memorized.
• To memorize AM stations or weak stations, preform
"Manual presetting" procedure with using "Manual
tuning" operation.
Auto presetting
Press the TUNING UP(+)/DOWN(-)
buttons for more than 0.5 second.
2
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
