• The multi-room system kit(sold separately ) is essential for operation from a remote location .
For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or
www.xantech.com.
• IR IN jack allows you to control this receiver from another room with the remote control unit.
• To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of
the connecting block.
• If this receiver is located inside a cabinet or other enclosure where the infrared beams from the remote control
unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the IR
IN jack to the output of the connecting block.
• To control other compatible component from another room with the universal remote control unit, connect the IR
OUT jack to the IR emitter.
Note:
• Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or
inverted fluorescent.
• This outlet is switched on (power-on mode) and off
(standby mode) according to power control as follows
(Maximum total capacity is 100 W (0.43A)).
• Plug this cord into a wall AC outlet.
ENGLISH
12
Standby mode - Switched AC outlet off
Power - on mode - Switched AC outlet on
11. CONNECTING MULTI-ROOM SYSTEM KIT
12. SWITCHED AC OUTLET
13. AC INPUT CORD