66346

Sherwood R 772 Manual

9
Zoom out
Zoom in
Previous page
1/70
Next page
ENGLISH
9
• Be sure to connect speakers firmly and correctly
according to the channel(left and right) and the
polarity (+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connection is incorrect, the
sound will be unnatural and lack bass.
• For installing the speakers, refer to “Speaker
placement” on page 10.
• After installing the speakers, first adjust the speaker
settings according to your environment and speaker
layout. (For details, refer to “SETTING THE
SPEAKER/ROOM EQ SETUP” on page 48.)
Surround back speakers
• When using only one surround back speaker, you
should connect it to SURROUND BACK/MULTI
LEFT channel.
• Because this receiver cannot drive the surround back
speakers and the ROOM 2 speakers simultaneously,
you should assign their power amplifier correctly
depending on how to use them.
(For details, refer to “CONNECTING ROOM 2
OUTS” on page 11 and “When selecting the AMP
ASSIGN” on page 40.)
Front Bi-Amp Connections.
• Some speakers are equipped with two sets of input
terminals, for bi-amplification.
• If no other surround back speakers are used, you
can connect the FRONT and the SURROUND BACK
/MULTI channels to the bi-amp-capable speakers.
(For details, refer to the operating instructions of your
bi-amp-capable speakers.)
• To drive the bi-amp-capable speakers, you should
assign the power amplifier to "BI-AMP".
Note :
• Before making bi-amp connections, remove the
short-circuiting bars from the terminals of your
speakers.
Caution :
• Be sure to use the speakers with the impedance of 6
ohms or above.
• Do not let the bare speaker wires touch each other or
any metal part of this unit. This could damage this
unit and/or the speakers.
8.CONNECTING SPEAKERS
R-772(G) 2007.9.17 4:43 PM 페이지 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood R 772 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood R 772 in the language / languages: English as an attachment in your email.

The manual is 8,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sherwood R 772

Sherwood R 772 User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info