ENGLISH
Operating the sleep timer
The sleep timer allows the
amplifier to continue to operate
for a specified period of time
before automatically shutting
off.
To set this unit to automatically
turn off after the specified
period of time.
Each time this button is pressed, the sleep time
changes as follows:
→ 10 → 20 → 30 → 60 → 90 → OFF
Unit : minutes
While operating the sleep timer, “SLEEP” lights up.
When the sleep time is selected, all display panels of
Sherwood components connected by the DIGI LINK
III are dimly lit.
Each time this button is pressed, the brightness of
all fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together
as follows:
→
ON
→
dim
→
OFF
In the display OFF mode, pressing any button will
restore the display ON mode.
Adjusting the brightness of the
fluorescent displays
OTHER FUNCTIONS
12
RECORDING
Start recording on the TAPE.
2
Select the desired input as a recording
source except for TAPE.
1
Recording with TAPE
Start play on the desired input.
3
Start recording on the VCR.
2
Select the desired input as a recording
source except for VCR.
1
Recording with VCR
Start play on the desired input.
3
The audio signals from the desired input will be
recorded onto the VCR.
The volume, tone(bass, treble) and balance settings have no effect on the recording signals.
When you select tuner, CD or AUX as a recording source, recording may be made on TAPE or VCR, or both simultaneously.