469881
66
Zoom out
Zoom in
Previous page
1/81
Next page
-64
4
Remove the lamp unit.
Loosen the securing screws from the
lamp unit. Hold the lamp unit and pull it
in the direction of the arrow. At this time,
keep the lamp unit horizontal and do not
tilt it.
5
Insert the new lamp unit.
Press the lamp unit fi rmly into the lamp
unit compartment. Fasten the securing
screws.
6
Replace the lamp unit cover.
Align the tab on the lamp unit cover
(1) and place it while pressing the cover
(2) to close it. Then tighten the user
service screw (3) to secure the lamp
unit cover.
Info
If the lamp unit and lamp unit cover are
not correctly installed, the power will
not turn on, even if the power cord is
connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp timer
and continue to use the same lamp, this
may cause the lamp to become damaged
or explode.
1
Connect the power cord and
open the lens shutter fully.
Plug the power cord into the AC socket
of the projector.
2
Reset the lamp timer.
While simultaneously holding down
MENU, ENTER and R on the projector,
press STANDBY/ON on the projector and
keep all four buttons pressed down until
the lamp indicator starts blinking green.
“LAMP 0000 H” is displayed, indicating
that the lamp timer is reset.
4
S
ecuring screws
S
ecuring screws
5
2
3
1
2
3
1
6
1
AC socketAC socket
2
Lamp indicator
STANDBY/
ON button
R
button
ENTER
button
MENU button
Regarding the Lamp (Continued)
INTERLOCK
Warning!
DO NOT DEFEAT THIS INTERLOCK
XV-Z17000_E_US.indb 64XV-Z17000_E_US.indb 64 2010/12/17 11:16:462010/12/17 11:16:46
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XV-Z17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XV-Z17000 in the language / languages: English as an attachment in your email.

The manual is 11,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XV-Z17000

Sharp XV-Z17000 User Manual - German - 80 pages

Sharp XV-Z17000 User Manual - Dutch - 80 pages

Sharp XV-Z17000 User Manual - French - 80 pages

Sharp XV-Z17000 User Manual - Italian - 80 pages

Sharp XV-Z17000 User Manual - Swedish - 80 pages

Sharp XV-Z17000 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info