469881
10
Zoom out
Zoom in
Previous page
1/81
Next page
-8
Other connected equipment
When connecting a computer or other audio-visual
equipment to the projector, make the connections
AFTER unplugging the power cord of the projector
from the AC outlet and turning off the equipment to be
connected.
Please read the operation manuals of the projector and
the equipment to be connected for instructions on how
to make the connections.
Using the projector in other countries
The power supply voltage and the shape of the plug may
vary depending on the region or country you are using the
projector in. When using the projector overseas, make
sure you use an appropriate power cord for the country
you are in.
Temperature monitor function
If the temperature inside the projector increases, due
to blockage of the air vents, or the setting location,
the temperature warning indicator will blink. And if the
temperature keeps on rising, “ ” will illuminate in
the lower left corner of the picture with the temperature
warning indicator blinking. If this state continues, the
lamp will turn off, the cooling fan will run and then the
projector will enter standby mode. Refer to “Maintenance
Indicators” on pages 60 and 61 for details.
Info
The cooling fan regulates the internal temperature,
and its performance is automatically controlled.
The sound of the fan may change during projector
operation due to changes in the fan speed. This
does not indicate malfunction.
Prevention of accidental ingestion
Keep the batteries and band accessory out of the
reach of small children. Small children can accidentally
swallow these parts.
If a child accidentally swallows any of these parts,
seek immediate medical attention.
Do not disassemble
Do not disassemble or modify the 3D Glasses.
Caution for lithium battery
Batteries must not be exposed to excessive heat such
as direct sunlight or fi re.
Replace only with the same or equivalent type of battery.
The battery may explode if improperly replaced.
Take care not to reverse the battery poles (+ and –)
when loading the battery. Follow the correct procedure
when loading the battery. (See page 51.) Loading the
battery incorrectly may damage the battery or cause it
to leak battery fl uid, which could result in a fi re, injury or
damage.
Handling the 3D Glasses
Do not drop, exert pressure on, or step on the 3D
Glasses. Doing so may damage the glass section, which
may result in injury.
Be careful not to trap your fi nger in the hinge section of
the 3D Glasses. Doing so may result in injury.
Pay special attention when children are using this
product.
Using the 3D Glasses
Parents/guardians should monitor children’s view-
ing habits to avoid their prolonged use without rest
periods.
Use only the 3D Glasses recommended for this product.
Use the 3D Glasses only for the specifi ed purpose.
Do not move around while wearing the 3D Glasses. The
surrounding area appears dark, which may result in
falling or other accidents that may cause injury.
Caring for the 3D Glasses
Use only the cloth provided with the 3D Glasses to clean
the lenses. Remove dust and soil from the cloth. Any
dust or other soiling on the cloth may result in scratches
on the product. Do not use solvents such as benzene
or thinners as doing so may cause the coating to peel
off.
When cleaning the 3D Glasses, take care not to allow
water or other fl uids to come into contact with the
glasses.
Always store the 3D Glasses in the case provided when
not in use.
When storing the 3D Glasses, avoid very humid or hot
locations.
Viewing 3D images
If you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your
eyes.
Do not use the 3D Glasses if they are cracked or bro-
ken.
Observe the following safeguards when using the 3D Glasses.
XV-Z17000_E_US.indb 8XV-Z17000_E_US.indb 8 2010/12/17 11:16:082010/12/17 11:16:08
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XV-Z17000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XV-Z17000 in the language / languages: English as an attachment in your email.

The manual is 11,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XV-Z17000

Sharp XV-Z17000 User Manual - German - 80 pages

Sharp XV-Z17000 User Manual - Dutch - 80 pages

Sharp XV-Z17000 User Manual - French - 80 pages

Sharp XV-Z17000 User Manual - Italian - 80 pages

Sharp XV-Z17000 User Manual - Swedish - 80 pages

Sharp XV-Z17000 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info