41595
60
Zoom out
Zoom in
Previous page
1/71
Next page
56
RS-232C technische gegevens en commando-instellingen
Bediening vanaf een computer
U kunt de projector met een computer bedienen door een RS-232C seriële bedieningskabel (cross-
type, los verkrijgbaar) op de projector aan te sluiten. (Zie blz. 26 voor de aansluitingen.)
Voorwaarden voor communicatie
Wijzig de instelling van de seriële poort van de computer zodat deze overeenkomt met de waarden
in de tabel.
Signaalformaat: Overeenkomend met de RS-232C norm. Pariteitsbit: Geen
Baudrate: * 9600 bps/115.200 bps Stopbit: 1 bit
Gegevenslengte: 8 bits Flow control: Geen
*
Stel de baudrate van de projector op dezelfde waarde in als de baudrate die door de computer wordt gebruikt.
Basisformaat
De commandos worden vanuit de computer in de volgende volgorde verzonden: commando,
parameter, retourcode. Nadat de projector het commando van de computer heeft verwerkt, stuurt
deze een antwoordcode naar de computer.
• Bij bediening van de projector met behulp van de RS-232C commando’s van een computer, moet u
minimaal 30 seconden wachten nadat de stroom is ingeschakeld voordat u begint met het zenden
van de commando’s.
• Als meer dan 1 code wordt verzonden, moet u elk commando pas versturen nadat de antwoordcode
voor het voorgaande commando is geverifieerd.
• “POWR????” “TABN _ _ _ 1” “TLPS _ _ _ 1” “TPOW _ _ _ 1” “TLPN _ _ _ 1” “TLTT _ _ _ 1”
“TLTL _ _ _ 1” “TNAM _ _ _ 1” “MNRD _ _ _ 1” “PJN0 _ _ _ 1”
Wanneer de projector een van de hierboven aangegeven commando’s ontvangt:
* Het beeldschermdisplay zal niet verdwijnen.
* De “Auto Power Off” timer zal niet worden teruggesteld.
Info
Retourcode (0DH)
C1 C2 C3 C4 P1 P2 P3 P4
Antwoordcode-formaat
Normaal antwoord
Problematisch antwoord (communicatiefout of onjuist commando)
O K E R R
Commando (4 posities) Parameter (4 posities)
Commandoformaat
Retourcode (0DH)
Retourcode (
0DH)
• Als er in de parameterkolom een onderstrepingsteken (_) staat, moet u een spatie invoeren.
Als er in de parameterkolom een sterretje (*) staat, vult u een waarde in binnen het bereik dat tussen
haakjes aangegeven staat onder GEKOZEN FUNCTIE.
*1 Voor het instellen van de projectornaam stuurt u de commando’s in de volgorde PJN1, PJN2 en
PJN3.
*2 De parameters van de Kleurtmp instellingen zijn als volgt.
Opmerking
Kleurtmp Parameter Kleurtmp Parameter
5500K _0 5 5 8500K _0 8 5
6500K _0 6 5 9300K _0 9 3
7500K _0 7 5 10500K _1 0 5
*3 De opdracht voor terugstelling van de lamptimer is alleen beschikbaar in de standby-modus.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XR-10X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XR-10X in the language / languages: Dutch as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XR-10X

Sharp XR-10X User Manual - Dutch - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info