526650
245
Zoom out
Zoom in
Previous page
1/256
Next page
2012/ October/
17
12_XL-UR14H_OM_EN.fm
E-12
EN
Recording on USB memory device
(continued)
Programme Recording
Notes:
Recording can be operated in CD stop mode only.
During CD playback, the REC button is invalid.
USB recording format is fixed to MP3 codec with bitrate
128 kbps.
ID3 tag informations will not be recorded on USB
device.
Recording to external HDD via USB terminal is not
supported.
USB device memory space for recording is depend on
the CD contents and type of recording method.
Do not POWER OFF the main unit whilst “WRITING”
shows on the display. Wait until “WRITING” display
disappear before turning it off.
“USB FULL” message will be displayed if USB device
is set in write-protect mode or if there is insufficient free
space in it.
When recording files to USB memory, folders inside it will
be created automatically.
Example:
The files will be saved in a folder named CDREC001. For
next recording session, the next folder will be created and
named CDREC002 and so on.
Maximum number of folders that can be created is 254.
Listening to the Radio
Notes:
When radio interference occurs, auto scan tuning may
stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To receive an FM stereo transmission:
Press the FUNCTION button to select FM ST (FM
STEREO) mode and “ST” indicator will be displayed.
” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the FUNCTION
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
1 Perform steps 1 - 4 in “Programmed play” section
on page 9.
2 Whilst in the stop mode, press the REC button to
start USB recording.
“START” will be displayed for a few seconds and
recording will start after the USB device has been
initialised.
3 During recording process, the display will show
normal CD programme playback.
4 After the last programme track is played, the unit
will stop playback and recording process
automatically, and “WRITING” will be displayed for
a few seconds.
USB folder structure (of recorded files)
First layer
Second layer
Third layer
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select FM
ST (FM stereo) or FM Mono.
3 Manual and Auto tuning to the desired station.
Manual tuning:
Press the TUNING ( or ) button on the remote
control repeatedly to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button on the remote
control is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will
stop at the first receivable broadcast station. Press
the button again to stop the auto tuning.
XL-UR14
245


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XL-UR14H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XL-UR14H in the language / languages: English, Polish, Turkish as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info