679563
10
Zoom out
Zoom in
Previous page
1/136
Next page
EN-9
Bluetooth
Bluetooth wireless technology is a short-range radio technology
that enables wireless communication between various types of
digital devices, such as mobile phone or computer. It operates
within a range of about 10 meters without the hassle of having
to use cables to connect these devices.
This unit supports the following:
Communication System: Bluetooth Specication version 2.1
Bluetooth + Enhanced Data Rate (EDR).
Support Prole : A2DP (Advanced Audio Distribution Prole)
and AVRCP (Audio/Video Remote Control Prole)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the mobile
phone for details on operation of your mobile phone while
transmitting the sound using a Bluetooth connection.
Bluetooth devices need to be initially paired rst before
they can exchange data. This unit can memorise up to a
maximum of 20 devices. Once paired, it is not necessary to
pair them again unless:
pairing is made with more than 20 devices. Pairing can
only be made one device at a time. If subsequent de-
vice is paired, the oldest device paired will be deleted
and replaced with the new one.
this unit is reset. All pairing information is deleted when
unit is reset.
Indicators:
Indicator Condition Bluetooth status
Lights up Connected
No indication Unconnected
However, the indication status is not displayed during
Bluetooth standby mode.
Pairing with Bluetooth source devices
1 Press the
(ON/STANDBY)
button to turn the power on.
2 Press the button on the main unit or BLUETOOTH
button on the remote control to select Bluetooth function.
BLUETOOTH” appears on the display.
3 Perform pairing procedure on the source device to detect
this unit. “XL-BB20D SHARP” will appear in the detected
devices list (if available) in the source device. (Refer the
source device operating manual for details).
Notes:
Place the devices to be paired within 1 meter of each
other when pairing.
Some source devices are unable to display lists of de-
tected devices. To pair this unit with the source device,
refer to the source device operating manual for details.
4 Select “XL-BB20D SHARP” from the source list. If Pass-
code* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN num-
ber or Password.
5 “Connected” appears on the display once the unit is suc-
cessfully paired with the source device. (Pairing information
is now memorised in the unit.) Some audio source devices
may connect with the unit automatically after pairing is com-
pleted, otherwise follow the instructions in the source device
operating manual to start connection.
6 Press the play button on main unit, remote control or source
device to start Bluetooth streaming playback.
Notes:
If a device such as microwave oven, wireless LAN card, Blue-
tooth device or any other device that uses the same 2.4 GHz
frequency is placed near the system some sound interruption
may be heard.
The transmission distance of the wireless signal between the de-
vice and the main unit is about 10 m, but may vary depending on
your operating environment.
If a steel concrete or metallic wall is between the device and the
main unit, the system may not operate at all, because the wire-
less signal cannot penetrate metal.
If this unit or the source device is turned off before Bluetooth con-
nection is completed, pairing will not be completed and the pair-
ing information will not be memorised. Repeat step 1 onwards to
start pairing again.
To pair with other devices, repeat steps 1 - 5 for each device. This
unit can memorise up to a maximum of 20 devices. If subsequent
device is paired, the oldest device paired will be deleted.
Once a device is ousted or deleted from the pairing list, the pair-
ing information for the device is also deleted. To listen to the
sound from the device again, it needs to be re-paired. Perform
steps 1 - 5 to pair the device again.
XL-BB20D does not support Bluetooth prole AVRCP 1.4, hence
there will be no volume synchronisation even if your Bluetooth
device supports such prole.
Listening to Bluetooth enabled devices
XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 9 2018-01-25 10:09:52
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XL-BB20D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XL-BB20D in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 28,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XL-BB20D

Sharp XL-BB20D Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info