679562
7
Zoom out
Zoom in
Previous page
1/64
Next page
EN
Connections
AUX socket
L
R
AB
a, Use a RCA to RCA audio cable (not included) to connect the TVs audio
output sockets to the AUX (R L) sockets on the unit.
b, Use a RCA to 3.5mm audio cable (not included) to connect the audio
player’s headphone socket to the AUX (R L) sockets on the unit.
Connect the (DAB/FM) Aerial
Connect one end of the aerial (included) to the ANT. socket at the rear of
the unit. Then position the aerial to obtain optimum reception.
IMPORTANT:
You may need to adjust the position of the aerial when tuning the radio
to receive the strongest signal.
Never leave the aerial where it can be pulled by children.
Connect to Power
EU
UK
Before connecting the AC power cord, ensure you have completed all
other connections.
Risk of product damage! Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the underside of the unit.
Connect the mains cable to the AC~ Socket of the unit and then into a
mains socket.
Set the Clock
Clock synchronization
In STANDBY mode, press and hold the /MONO/STEREO button on the
remote control to synchronize the clock. Press the
/ buttons on the
remote control or on the unit to switch the clock synchronization modes:
• RDS Only synchronize with the RDS radio station.
• OFF Turn o the clock synchronization function, clock needs to be
adjusted manually.
Then press the
button on the unit or the /SCAN on the remote
control to con rm.
Manual Setting the clock
--:--
00:00
1
1
1
1
Manual Setting the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote
control or on the unit until the hour digits are  ashing.
Press the
button on the unit or the /SCAN button
on the remote control to select 12/24 hour format.
2. Press the
/ buttons on the remote control or on the unit to
adjust the hour digits while  ashing, then press CLOCK button on the
remote control to con rm, then the minute digits will  ash.
3. Press the
/ buttons on the remote control or on the unit to
adjust the minute digits while  ashing, then press the CLOCK button
on the remote control to con rm. Each activated state will be cleared
if any buttons are not pressed within 15 seconds.
Set the Alarm Clock Timer
The clock time must be set to the current time and for the timer to operate
correctly
1. In STANDBY mode, press and hold the TIMER/SLEEP button on the
remote control until the hour digits  ash on the display.
2. Press the
/ buttons on the remote control or on the unit to
adjust the hour digits, and then press the TIMER/SLEEP button on the
remote control to con rm, the minute digits will  ash on the display.
3. Press the
/ buttons on the remote control or on the unit to
adjust the minute digits, and then press the TIMER/SLEEP button on
the remote control to con rm, the mode will  ash on the display.
4. Press the
/ buttons on the remote control or on the unit to
select:
FM (to wake to your selected FM Radio Station)
DAB (to wake to your selected DAB Radio Station)
BUZZER (to wake to a buzzer sound)
DISC (to wake to your DISC music)
USB (to wake to your USB music)
5. Press the TIMER/SLEEP button on the remote control to con rm, the
display will show the volume level.
6. Press the
/ buttons on the remote control or on the unit to
adjust the volume, and then press the TIMER/SLEEP button on the
remote control to con rm, the display will show the current time and
will appear from the display.
Tips:
Each set state will be cleared if any button is not pressed within 15
seconds.
The FM tuner timer will show the last tuned station.
Activate and Deactivate the Alarm Timer
Press the TIMER/SLEEP button on the remote control to view the alarm
settings or activate the alarm.
To deactivate the alarm, press the TIMER/SLEEP two times. The
will
disappear from the display on the front of the unit.
To activate the alarm, press the TIMER/SLEEP two times. The
will
show from the display on the front of the unit.
Stop Alarm Ring
When the alarm rings, press the power button on the remote control or
on the unit. The alarm stops but the alarm settings remain.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XL-B715D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XL-B715D in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XL-B715D

Sharp XL-B715D Quick start guide - All languages - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info