679564
7
Zoom out
Zoom in
Previous page
1/40
Next page
EN
CD operations
1. Press the SOURCE button on the panel or the remote control
to enter the CD mode. Press the EJECT button to pop out the
disc drawer, put a CD on, then press the EJECT button again.
2. Press the
button to pause or play the song.
3. Press the STOP/MO/ST button on remote control to
stop playing, press the
button to re-start.
4. Press the PREV/NEXT button or
/ button on
remote control to skip to the previous or next song.
5. Press the
/ button on remote control to fast forward or fast
rewind the playback, press repeatedly to resume normal speed.
6. To directly select a speci c song press the number buttons 0-9 on
remote control.
Example:
If the track number consists of two digits, for example25, press
button “2“, and then button “5“ to select the 25th track.
If the track number is a one digit number, for example
9, press “0“  rst, then “9“ to skip to the 9th track.
7. REPEAT button:
While in playing mode, press the REPEAT button to set repeat mode.
For CD and CD-R discs, press the REPEAT
button to repeat playing songs.
Press once to repeat current song. Press again to repeat all tracks.
Press a third time to cancel.
8. Press the SHUFFLE button on remote control to play
the disc in random order.Press again to resume.
9. You can set the disc played in a programmed order:
Press the STOP/MO/ST button on remote control to stop playing.
Press the PROGRAM button on remote
control. The screen displays: P01.
Press the number buttons on remote control
to select the tracks to program.
Press the
/ buttons on remote control
to skip between the program tracks.
Press the PROGRAM button on the remote control to con rm.
To begin the programmed order, press the
button.
To cancel the program sequence, press
the STOP/MO/ST button twice.
Notes:
MP3 and WAV formats are supported.
Unsupported  le formats are skipped. For example, Word documents
(.doc) or MP3  les with extension .dlf are ignored and not played.
Bluetooth Operation
The Micro system has Bluetooth capability and is able to receive a signal
within 7 meters. To pair the Micro system with a Bluetooth device:
1. Press the SOURCE button repeatedly to enter the Bluetooth
mode, the“bt“ message appear and  ash on the display.
2. Activate your Bluetooth device and select the search mode.
3. Select “SHARP XL-B510” from the search list and connect.
4. Enter “0000“ for password if prompted.
5. When the devices are connected to each other, a con rmation
sound will be made. “bt” will stop  ashing in the display.
6. Now you can enjoy the music from your device.
7. To turn o the Bluetooth function, switch to another function on the
Micro system, or disable the function on your Bluetooth device.
Connect other audio devices
Audio allows your unit quickly and easily to connect to an MP3 player or
other external sources.
1. Use a 3.5mm audio cable to connect your external audio
device to the AUX IN socket on the front panel.
2. Connect the Micro System mains plug to the power supply.
3. Press the SOURCE button to switch to the AUX IN mode.
4. You may need to operate the external audio
device directly for playback features.
5. For optimum volume levels, adjust the volume
on the external audio device.
USB Operation
It is possible to listen to the music using the USB device interface of the
unit.
Connecting a USB device:
1. Switch the unit on and select USB mode by
pressing the SOURCE button.
2. Connect the USB device to the USB connection
socket on the front panel of the unit.
3. The radio will now play songs which are saved on the USB device.
Notes:
MP3 and WAV formats are supported.
Unsupported  le formats are skipped. For example, Word documents
(.doc) or MP3  les with extension .dlf are ignored and not played
Even when the  les are in a supported format (MP3), some
may not play or display depending on the compatibility.
In some case, reading may be as long as 60
seconds, this is not a malfunction.
Depending on the amount of data and media speed, it
may take longer for the unit to read the USB device.
The maximum USB memory size is 64GB.
USB memory device must be formatted in FAT, FAT16 or FAT32
Troubleshooting
No Power
Reason
Power cable not connected to wall socket
Power socket is not switched on
Solution
Make sure the plug is connected
Switch the power on
No Sound CD/AUX/RADIO
No Sound from AUX input
Reason
Volume is too low
AUX source volume is too low
Solution
Increase the volume
Increase the output volume of the AUX source
Sound is distorted
Sound is distorted from AUX Input
Reason
Volume is too high
AUX source volume is too high
Solution
Reduce the volume
Reduce the output volume of the AUX source
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XL-B510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XL-B510 in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XL-B510

Sharp XL-B510 Quick start guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info