160018

Sharp xl 60 Manual

22
Zoom out
Zoom in
Previous page
1/36
Next page
21
(Continued)
➂
After scanning, the number of stations that have
been stored in memory automatically will flash
for 4 seconds.
Notes:
● Only RDS stations can be stored in memory.
● If the same station is broadcasting on different
frequencies, the transmission with the strongest
broadcast frequency will be stored in memory.
● Any station which has the same frequency as
one which has been already stored in memory
will not be stored again.
● If a 30th station is stored in memory during a
scan, the scanning will stop at that station. The
number of stations will flash for 4 seconds.
● If no stations have been stored in memory,
“0MEMORY” will appear for about 4 seconds.
● If 30 stations have already been stored in
memory and the ASPM button is pressed,
“ASPM” will flash for 4 seconds and the scan will
be aborted.
If you want to redo the ASPM operation from the
beginning, erase the preset memory, and then
perform steps 1 - 4.
To stop the ASPM operation before it is
complete:
Press the ASPM button whilst it is scanning for sta-
tions.
● The stations that have already been stored in
memory will be kept there.
To erase one of the contents of preset
memory:
1 Press the VOLUME/JOG button.
2 Turn the jog dial to select the preset channel
number you want to erase.
3 Press the MEMORY/SET button.
4 Within 5 seconds, press the TUN CLEAR but-
ton.
To erase all of the contents of preset
memory:
Perform steps 1 - 3 in the section “RESETTING
THE MICROCOMPUTER”, on page 31.
4
1
3
2
■ ASPM
(Auto Station Program Memory)
At first, it is recommended that you store stations
in memory using ASPM.
(This memory can be used for PTY searches.)
When the ASPM button is pressed whilst tuned to
the FM band, the RDS (Radio Data System) func-
tion will automatically search for new RDS stations.
Up to 30 stations can be stored in memory. (If you
have already stored some stations in memory, the
number of new stations you can store will be less.)
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the FUNCTION button until “FM” or “AM”
appears in the display.
3 Press the BAND button to select the FM ST or
FM band.
● Even if FM monaural is selected, if ASPM scan-
ning is being performed, the unit will enter the
FM stereo mode.
4 Press and hold down the ASPM button for at
least 3 seconds.
➀
After "ASPM" has flashed for about 4 seconds,
scanning will start. (87.50 - 108.00 MHz)
➁
When an RDS station is found, “RDS” will ap-
pear first, and then “MEMORY” and the preset
channel number will flash for 2 seconds. Finally,
the station will be stored in memory.
60H/70H(SUK)18-22 00.1.5, 11:40 AM21
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp xl 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp xl 60 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info