160018
9
Zoom out
Zoom in
Previous page
1/36
Next page
8
PREPARATION FOR USE
Connect each speaker wire to the SPEAKER termi-
nals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
Notes:
Connect the wire with the white line to the minus
(-) terminal and the plain wire to the plus (+) ter-
minal.
Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.
Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
Unplug the AC power lead from the AC socket
before connecting or disconnecting any com-
ponent.
Speaker connection
2
1
3
Right speaker
Left speaker
White
line
Removing the speaker grilles
1 Remove the lower part of the speaker grille first.
2 Remove the upper part of the speaker grille.
Caution:
When the speaker grilles are removed, the speaker
diaphragms are exposed. Make sure nothing comes
into contact with the speaker diaphragms.
Mounting the speaker grilles
Fit the four posts on the speaker grille into the
mounting holes and push them lightly with the palm
of your hand to secure.
*60H/70H(SUK)08-12 00.1.5, 11:39 AM8
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp xl 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp xl 60 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info