160454
12
Zoom out
Zoom in
Previous page
1/19
Next page
RADIO OPERATION
Tuning
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the FUNCTION button until "FM" or "AM"
appears in the display.
3 Press the BAND button to select the desired fre-
quency band. (FM ST, FM or AM)
4 Press the TUNING ( or ) button to tune in
to the desired station.
Manual tuning:
Press the TUNING ( or ) button as many times
as required to adjust the frequency shown on the
display to the frequency of the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for
more than 0.5 seconds, scanning will start automat-
ically and the tuner will stop at the first receivable
broadcast station.
Notes:
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically at
that point.
If a weak station signal is found during auto scan
tuning, the station will be skipped.
To stop the auto tuning, press the TUNING ( or
) button again.
5 To receive an FM stereo transmission, press the
BAND button so that the "ST" indicator on the
display lights up.
" " will appear when an FM broadcast is in ste-
reo.
6 If the FM reception is weak, press the BAND but-
ton so that the "ST" indicator goes out.
The reception changes to monaural, the sound be-
comes clearer.
Note:
The last station tuned in will be recalled, even after
changing the tuning band or the function, or after
switching the unit to the stand-by mode.
Preset tuning
You can store up to 30 stations in memory (30
stations consisting of any combination of FM and
AM stations you like) and recall them at the push
of a button.
To enter stations into memory:
1 Perform steps 1 - 6 in the "Tuning" section.
2 Press the MEMORY/SET button.
"MEMORY" will flash.
3 Within 5 seconds, turn the jog dial to make
the preset channel number flash in the dis-
play.
Store the stations in memory, in order, starting
with preset channel 1.
4 Within 5 seconds, press the MEMORY/SET
button to store that station in the selected sta-
tion preset number memory.
If the "MEMORY" and preset number indicators
go out before the station is memorised, repeat
the operation from step 2.
5 Repeat steps 1 - 4 to set other preset stations,
or to change a preset station.
After use:
Press the ON/STAND-BY button to enter the
stand-by mode.
1
2
3,5,6
4
(Main unit operation)
2,4
3
(Main unit operation)
XL-530E(SUK) TINSE0017SJZZ
11
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp xl 530 h at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp xl 530 h in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info