469885
28
Zoom out
Zoom in
Previous page
1/59
Next page
-28
Controlling the Projector via LAN
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: “Picture” screen display for COMPUTER1
On these screens, you can make projector
settings or adjustments. You can set or adjust
the following items :
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
After clicking the
Apply
button, the set val-
ues appear. Confirm that the values are set
properly, and then click the
Confirm
button.
Note
After setting items, wait for 10 seconds and
then re-access.
User Name and Password can be up to 8
characters.
You can input the characters below :
a-z, A-Z, 0-9, -, _
To cancel User Name and Password, enter
nothing and then press “Apply” button.
Description
Setting of user name for
security protection.
Setting of password for
security protection.
It is possible to set up to three
IP addresses allowing connec-
tion to the projector.
No limits are set to IP addresses
connecting to the projector.
For security improvement, only an
IP address set by “Address 1-3”
can be connected to the projector.
Items
User Name
Password
Accept IP
Address
All IP
Addresses
From only
specific IP
addresses
Picture Mode
CLR Temp
Progressive
C.M.S. Adjustment
DNR
Signal Type
Dynamic Range
Color Space
Auto Sync
Auto Sync Disp
Audio Out
Internal Speaker
Resize
OSD Display
Video System
(VIDEO/S-VIDEO)
Background
Startup Image
Eco Mode
Auto Search
Auto Power Off
Password
Lamp Mode
Lens Type
Projection Mode
Keylock Level
Set Inputs
Fan Mode
Auto Restart
RS-232C Speed
Monitor Out (Standby)
Video Wall
(See page 44.)
Stack Setting
(See page 41.)
All Reset
OSD Language
Note
If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be dis-
played. Wait for a moment and then oper-
ate again.
You cannot operate this page while the pro-
jector is warming up.
While the projector is in standby mode, you
can only control “Power ON”.
For details about each item, refer to the
projector’s operation manual.
For details about the items that will be
initialized in “All Reset”, refer to the
projector’s operation manual. (The network
setting items will not be initialized.)
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XG-P610X-N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XG-P610X-N in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp XG-P610X-N

Sharp XG-P610X-N User Manual - English - 86 pages

Sharp XG-P610X-N User Manual - Dutch - 86 pages

Sharp XG-P610X-N User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info