543352
67
Zoom out
Zoom in
Previous page
1/73
Next page
-65
Appendix
Note
This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, turn off the LCD display on the notebook computer and output the display data
in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s
operation manual.
When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
When projecting the RGB interlace signal using COMPUTER/COMPONENT 1, 2 or DVI-D with “Signal Type”
set to “Auto” or “RGB”, the image may not be projected as desired. In this case, use either Video or S-Video.
When “Screen resolution” of the computer is different from the resolution displayed on the projected image,
follow the procedures shown below.
- Refer to “Resolution” on the “SIG-ADJ” menu and select the same resolution as the resolution in “Screen
resolution” of the computer.
- Depending on the computer you are using, the output signal may not be faithful to the “Screen resolu-
tion” adjustment. Check the settings of the computer's signal output. If the settings cannot be changed,
it is recommended that the resolution be set to “1024 × 768”.
Computer Compatibility Chart
Multiple signal support
Horizontal Frequency: 15–70 kHz
Vertical Frequency: 43–85 Hz
DTV
Computer
Pixel Clock: 12–108 MHz
Sync signal: Compatible with TTL level
Compatible with sync on green signal
27.0
31.5
37.9
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
31.3
35.2
37.9
46.6
48.1
46.9
53.7
40.3
48.4
56.5
60.0
68.7
45.0
47.8
62.8
47.7
47.8
55.0
66.2
67.5
64.0
64.0
34.9
49.7
60.2
68.7
60
70
85
60
70
85
50
60
70
72
75
85
50
56
60
70
72
75
85
50
60
70
75
85
60
60
75
60
60
60
70
75
60
60
67
75
75
75
Upscale
True
True
Intelligent Compression
Upscale
Intelligent Compression
640 × 400
720 × 400
640 × 480
800 × 600
1,024 × 768
1,280 × 720
1,280 × 768
1,280 × 800
1,360 × 768
1,366 × 768
1,152 × 864
1,280 × 1,024
1,400 × 1,050
640 × 480
832 × 624
1,024 × 768
1,152 × 870
MAC 13"
MAC 16"
MAC 19"
MAC 21"
PC
VGA
SVGA
XGA
WXGA
SXGA
SXGA+
VGA
SVGA
XGA
SXGA
Display
PC/MAC Resolution VESA Standard
Vertical Frequency
(Hz)
DVI
Support
Horizontal Frequency
(kHz)
15.7
31.5
33.8
15.6
31.3
37.5
45.0
33.8
28.1
33.8
480
I
480P
540P
576
I
576P
720P
720P
1035
I
1080
I
1080
I
60
60
60
50
50
50
60
60
50
60
Signal Vertical Frequency (Hz) DVI SupportHorizontal Frequency (kHz)
The following is a list of modes that conform to VESA. However, this projector supports other signals
that are not VESA standards.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp XG-C435X-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp XG-C435X-L in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info